5-10 Onboard Indicators - Supero SuperServer 5017R-MF User Manual

S S
UPER ERVER 5017R-MF User's Manual

5-10 Onboard Indicators

LAN1/LAN2 LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each Giga-
bit LAN port, one LED indicates activity
when blinking while the other LED may be
green, amber or off to indicate the speed
of the connection. See the table on the
right for the functions associated with the
connection speed LED.
Rear Unit ID LED (UID LED)
The rear Unit ID LED is located at UID
LED on the backpanel. This LED is used
in conjunction with the rear UID switch to
provide easy identifi cation of a system
that might be in need of service.
IPMI Heartbeat LED (DP3)
The IPMI Heartbeat LED is located at
DP3. When DP3 blinks, the IPMI feature
is functioning properly. Refer to the table
on the right for details. Also see the lay-
out below for the LED location.
Onboard Power LED (DP2)
An Onboard Power LED is located at
PWR LED on the motherboard. When
PWR LED is on, it means that the AC
power cable is connected, the power sup-
ply switch and soft switch are on, and the
system is running.
Connection Speed Indication
LED State Defi nition
Off No connection or 10 Mb/s
Green 100 Mbps
Amber 1 Gbps
Rear UID LED
LED Indication
Blue: Solid
IPMI Heartbeat LED Indicator
LED Indication
Green: Blinking
Onboard Power LED
LED Indication
Status
Off System Off (Soft Switch)
On System is Running
5-24
LAN LED
UID Toggled On
IPMI is ready for use
Defi nition