Table of Contents
Advertisement
S
S
UPER
ERVER 5017R-MF User's Manual
Unpacking
The serverboard is shipped in antistatic packaging to avoid static damage. When
unpacking the board, make sure the person handling it is static protected.
DVD-ROM Drive (Optional)
Power Supply
USB Ports
6-2
Control Panel
The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the serverboard to provide you with system control buttons and
status indicators. These wires have been bundled together in a ribbon cable to
simplify the connection.
Connect the cable from JF1 on the serverboard to the Control Panel PCB (printed
circuit board). Make sure the red wire plugs into pin 1 on both connectors. Pull all
excess cabling out of the airfl ow path.
The LEDs inform you of system status. See Chapter 3 for details on the LEDs and
the control panel buttons. Details on JF1 can be found in Chapter 5.
Figure 6-1. Chassis Views
Mouse/Keyboard
IPMI LAN Port
COM Port
VGA Port
6-2
Control Panel
PCI Slot
Ethernet Ports
Advertisement
Table of Contents
