Supero SuperServer 5017R-MF User Manual page 48

S S
UPER ERVER 5017R-MF User's Manual
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller)
LED connection for LAN port 1 is located
on pins 11 and 12 of JF1, and the LED
connection for LAN Port 2 is on Pins 9
and 10. NIC1 LED and NIC2 LED are
2-pin NIC LED headers. Attach NIC LED
cables to NIC1 LED and NIC2 LED to
display network activities for LAN 1 and
LAN2. Refer to the table on the right for
pin defi nitions.
Overheat (OH)/Fan Fail/Front UID
LED
Connect an LED cable to the Front UID
and OH/Fan Fail connections on pins 7
and 8 of JF1 to display UID (Unit ID) sig-
nals or to provide advanced warnings for
chassis overheat/fan failure. Refer to the
table on the right for pin defi nitions.
Reset Button
The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to a the
hardware Reset Button on the computer
case. Refer to the table on the right for
pin defi nitions.
Power Fail LED
The Power Fail LED connection is located
on pins 5 and 6 of JF1. Refer to the table
on the right for pin defi nitions.
LAN1/LAN2 LED
Pin Defi nitions (JF1)
Pin#
9/11
10/12
OH/Fan Fail LED
Pin Defi nitions (JF1)
Pin#
7 Vcc/Blue UID LED
8 OH/Fan Fail LED
OH/Fan Fail Indicator Status
State Defi nition
Off
On
Flashing
Reset Button
Pin Defi nitions (JF1)
Pin#
3
4
PWR Fail LED
Pin Defi nitions (JF1)
Pin#
5
6
5-16
Defi nition
Vcc
Ground
Defi nition
Normal
Overheat
Fan Fail
Defi nition
Reset
Ground
Defi nition
Vcc
Ground