Led Bulb Replacement - Accu-Scope 3000-LED series Manual

Figure 15
Figure 16
Figure 17
ACCU-SCOPE
®
3000-LED MICROSCOPE SERIES
Replacing the LED Bulb
Turn the main switch to "0" (OFF) before
replacing the LED bulb. Unplug the power cord
from the microscope.
Gently place the microscope on its arm as shown
in Figure 15.
Using a Philips head screwdriver, remove the 4
screws to release the base plate (Figure 16).
Disconnect the make/break connector (Figure 17).
14