Related Manuals for Accu-Scope 3075 SERIES
Summary of Contents for Accu-Scope 3075 SERIES
- Page 1 MANUAL 3075 STEREO MICROSCOPE SERIES 73 Mall Drive, Commack, NY 11725 • 631-864-1000 (P) • 631-543-8900 (F) www.accu-scope.com • info@accu-scope.com...
-
Page 2: Table Of Contents
USING AN AUXILIARY LENS ..................11 ADJUSTING TRINOCULAR VIEWING HEAD .............. 12 OPTICAL DATA ........................13 TROUBLESHOOTING ......................14 MAINTENANCE........................15 SERVICE ..........................15 WARRANTY ........................15 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 3: Safety Notes
A regular schedule of preventative ® maintenance by qualified personnel is highly recommended. Your authorized ACCU-SCOPE distributor can arrange for this service. ®... -
Page 4: Introduction
COMPONENTS DIAGRAM Binocular Head Stand Eyepieces Focusing Knob Lock‐screw Stage Clips Stage Plate NOTE: Stand ordered may not be as pictured above. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 5: Components Diagram
3075 STEREO MICROSCOPE COMPONENTS DIAGRAM (continued) Lock‐screw Trinocular Head C‐mount adapter Light Path Selector Lever ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 6: Other Available Configurations/Stands
Binocular on E-LED Stand Binocular on LED Stand Trinocular on Pole Stand Binocular on Boom Stand Binocular on Ball Bearing Boom Stand Binocular on Articulating (Flex Arm) Stand ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 7: Assembly
*Camera C‐mount Adapter 4 Eyepiece Lock Screw Microscope Body Lock Screw Stand Stage Clip Stage Plate *Mount the C-mount adapter to camera first, then mount the camera to the microscope ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 8: Adjusment And Operation
clips ⑩. Using the Glass Stage Plate For examination of specimens requiring transmitted illumination, use the frosted/glass stage plate. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 9: Adjusting Binocular Viewing Head
Allen wrench provided. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 10: Focus Adjustment
Moving the Microscope Before moving the microscope, be sure to remove any slide/samples. When moving the microscope, hold the stand and base to keep it level. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 11: Mounting & Removing The Micrometer
The 0.3x and 0.4x auxiliary lenses can only be Fig. 8 used with boom stands, ball bearing stands, or the flex arm stand. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 12: Adjusting Trinocular Viewing Head
adapter until it is clear. Fig. 11 Repeat the process until the image is clear within the entire zoom range. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 13: Optical Data
View Field (mm) 44.8-6.7 33.6-5.0 26.9-4.0 17.9-2.7 13.4-2.0 9.0-1.3 6.7-1.0 Magnification 6x-40.5x 8x-54x 10x-67.5x 15x-101x 20x-135x 30x-202x 40x-270x View Field (mm) 34.8x-5.1 26.1-3.87 20.9-3.1 13.9-2.1 10.4-1.55 6.9-1 5.2-7.5 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 14: Troubleshooting
Fuse has burned out Replace the fuse Lamp does not work Dirt on the stage obstructed the Clean the stage path of light Voltage from power supply is too Use a transformer to decrease high the voltage Lamp burns out frequently The bulb is not standard Use the recommended bulb Fuse burns out frequently Voltage from power supply is too Use a transformer to decrease high the voltage Light flickers Bulb needs replacement Replace bulb The wires are not connected Correctly connect the wires correctly ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 15: Maintenance
SCOPE at (631) 864-1000. This warranty is limited to the continental United States of America. All items returned for warranty repair must be sent freight prepaid and insured to ACCU-SCOPE INC., 73 Mall Drive, Commack, NY 11725 – USA. All warranty repairs will be returned freight prepaid to any destination within the continental United States of America, for all foreign warranty repairs return freight charges are the responsibility of the individual/company who returned the merchandise for repair.