Related Manuals for Accu-Scope 3019
Summary of Contents for Accu-Scope 3019
- Page 1 MANUAL 3019 FLUORESCENCE MICROSCOPE SYSTEM 73 Mall Drive, Commack, NY 11725 • 631-864-1000 (P) • 631-543-8900 (F) www.accu-scope.com • info@accu-scope.com...
-
Page 2: Table Of Contents
CENTERING THE MERCURY LAMP ..............17 CENTERING THE FIELD IRIS DIAPHRAGM ............17 SELECTING THE FLUORESCENCE FILTER CUBE TROUBLESHOOTING ......................18 MAINTENANCE........................19 SERVICE ..........................19 WARRANTY ........................19 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 3: Safety Notes
15°. If the bulb is ® SCOPE distributor can arrange for this installed at an angle greater than this, there service. is an increased risk of the mercury bulb bursting. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 4: Introduction
Styrofoam container by its arm and base and place the microscope on a flat, vibration-free surface. COMPONENTS DIAGRAM Binocular Head Eyepiece Tension Adjustment Objective Knob Stage Coarse Focusing Condenser Knob Focus Block Illuminator Fine Focusing Light Adjustment Housing Knob Knob ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... - Page 5 3019 FLUORESCENCE MICROSCOPE SYSTEM COMPONENTS DIAGRAM Lock Screw Y-Axis Adjustment Knob Objective Nosepiece Coarse Focusing Knob Iris Diaphragm Adjustment Control Fine Focusing Knob X-axis Power Adjustment Switch Knob ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
- Page 6 Adjustment Screws Head Eyepiece Field Diaphragm Adjustment Lever Fluorescence Illuminator Fluorescence Filter Mercury Lamp Selection Lever Housing Shutter Slider Field Diaphragm Adjustment Screw Microscope Frame Mercury Lamp Power Supply ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
-
Page 7: Assembly Diagram & Procedure
Head Mercury Lamp House Eyepiece Fluorescence Illuminator Mercury Lamp Socket Assembly Mercury Lamp Filter Cube UV Protection Shield Power Cord Mercury Lamp Power Supply Microscope Frame ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... - Page 8 Match the dovetail on the bottom of the fluorescence illuminator to the dovetail mount on the microscope frame, set it on top and tighten the lock screw. Fig. 4 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
- Page 9 ①. Align the head with the eyepieces facing toward the front of the illuminator and stand, and insert into the dovetail on the top of the illuminator. Tighten the lock screw. Fig. 8 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
- Page 10 ② from holder. Remove the fuse ④ from the flute ③ and change a new one. Re-insert the flute back into the main power supply. Fig. 11 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
-
Page 11: Interpupillary Distance
This allows the user to Fig. 14 adjust the coarse control tension to their individual preference. (Fig. 14). ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 12: Field Diaphragm
For optimal viewing conditions set the condenser aperture diaphragm lever to match the magnification of the objective in the optical path (Fig. 16). Fig. 16 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 13: Oil Objective
(40xR) and deforming its optical performance, prevent dust and dirt from accumulating on the lens of the objective and degrading its optical performance, and will keep the slide clean to work with. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 14: Fluorescence Operation
NOTE: color fading preventing agent cannot be used with certain specimens Precautions on the specimen color fading: ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 15: Illumination
② position to allow the light to pass through the specimen. A ϕ32 filter can be installed in the last position to filter the light if desired. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 16: Centering The Mercury Lamp
“+” scale. (Fig. 22 D) Centering the bulb after it warmed up will be more precise. After replacing the mercury bulb (usually 200 hours), it should be re-centered. Fig. 22 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 17: Centering The Field Iris Diaphragm
The filter block should be accordance with the specimen. Fig. 25 Pull the filter flashboard ① to the most right position. (See Fig. 25) Use the filter selecting lever ② to select the needed filter cube. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 18: Troubleshooting
Wait for 10 minutes or more after ignition The mercury lamp flickers or period after ignition the brightness is low The lamp life has expired Replace the mercury lamp ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com... -
Page 19: Maintenance
864-1000. This warranty is limited to the continental United States of America. All items returned for warranty repair must be sent freight prepaid and insured to ACCU-SCOPE INC., 73 Mall Drive, Commack, NY 11725 – USA. All warranty repairs will be returned freight prepaid to any destination within the continental United States of America, for all foreign warranty repairs return freight charges are the responsibility of the individual/company who returned the merchandise for repair.