Filter; Fuse Replacement - Accu-Scope 3000-LED series Manual

3000-LED MICROSCOPE SERIES
Using & Installing A Filter
A filter is used to make the background color
more suitable for the application and as a method
to increase the contrast.
Using a small jeweler's flathead screwdriver,
②
remove the set screw that secures the illuminator
①
housing cover ① to illuminator condenser. Install
the filter (rough side downward) onto the groove
of the illuminator condenser ② . Place the cover
back on the illuminator condenser and re-install
the set screw (Fig. 13).
Fig. 13
Filters are available in clear blue, frosted blue,
green, yellow and white.
Replacing the Fuses
Turn the main switch to "0" (OFF) before
replacing a fuse. Unplug the power cord from the
① ②
microscope. Screw off the fuse or from the
fuse base with a Phillip's head type screwdriver.
Install a new fuse and screw it on the fuse base
(see Fig. 14).
②
Specification of the fuse: 250V, 3.15A.
①
CAT #00-3277-3A
Fig. 14
ACCU-SCOPE
®
13