Introduction - Salicru SLC Cube3+ User Manual

1. INTRODUCTION.

1.1 ACKNOWLEDGEMENT LETTER.
We would like to thank you in advance for the trust you have placed
in us by purchasing this product. Read this instruction manual care-
fully in order to be familiar with its contents, because as much you
understand and know the equipment, the higher will be the satis-
faction degree, safety level and functionality optimization.
We remain at you entire disposal for any further information or any
query you should wish to make.
Yours sincerely.
SALICRU
ˆ The equipment here described can cause important
physical damages due to wrong handling. This is why,
the installation, maintenance and/or fixing of the here de-
scribed equipment must be done by our staff or specifi-
cally authorised.
ˆ Although no effort has been spared to guarantee that the
information in this manual is complete and accurate, we are
not responsible of any errors or omissions that may exist.
ˆ The images included in this document are for mere illustra-
tion and may not accurate represent the parts of the equip-
ment showed. However, the differences that may arise will
be smoothed or solved with the correct labelling on the unit.
ˆ According to our policy of constant evolution, we reserve
the right to modify the specifications, operating or
described actions in this document without fore-
warning.
ˆ All reproduction, copy, third party concession, modi-
fication or part or total translation of this manual or
document, in any form or medium, without the previous
written authorization of our firm, it is prohibited, re-
serving of the complete and exclusive property right over
itself.
4
2. INFORMATION FOR SAFETY.
2.1. USING THIS MANUAL.
The purpose of this manual or publication is to provide information re-
garding the safety and to give explanations about the procedures for the
transport, installation and operating of the equipment.
Read this manual carefully before starting or making any action on the
equipment and specially in those instructions regarding safety.
Keep this document for future consults and keep it on hand during
the installation and commissioning procedures.
In the next pages, the «equipment» or «unit» and «(S.T.S.)» terms,
are referred to the Uninterruptible Power Supply (UPS) and Service
and Technical Support respectively.
2.1.1. Conventions and used symbols.
Some of the symbols can be used and shown in the equipment,
batteries and/or in the description of this document. It is advisable
to understand their meaning.
«Danger of electrical discharge» symbol. Pay special at-
tention to this symbol, because it has features and basic
safety informations for persons. To not respect these indi-
cations can result in serious injuries or even the death due
to electrical discharges.
«Warning» symbol. Carefully pay attention to this symbol,
because it has features and basic safety informations for
persons and things. To not respect these indications can
cause damages in the own equipment, installation or loads.
«Warning» symbol. The electrolyte corrodes the metals,
and when it is in contact with humans is harmful and it is
also a big contaminant for the environment.
Never touch the spilled electrolyte of the deposited rests in the
batteries and its surrounding with bare hands. Under no circum-
stances, it has not to be ingested or in contact with the eyes.
In case of accidental spillage act accordingly for its collec-
tion, in accordance with the protocol of your company.
«Explosion» risk. Batteries emits explosive gases during its
charge, risk of explosion exists with a short-circuit or fire. Do
not leave conductive parts over the battery terminals, high risk
of short-circuit and explosion can happens if there were accu-
mulated gases inside the equipment or battery enclosure.
Attention! Danger of tipping during transport on inclined
areas and when removing battery trays without prior stabi-
lizing the unit. Do not pull out more than one tray at the
same time, high risk of serious injury to the operator as a
result of the impact of the possible fall down of the equip-
ment and / or entrapment.
Precaution! Fan blades in operation or fans can be started
up automatically suddenly.
Attention! Hot or very hot surface, elements or parts. Pos-
sible burns due to the temperature.
USER MANUAL