Installing Your Device; Step 1: Insert The Sim Card; Step 2: Attach The Antennas - NetComm NTC-140W Series Quick Start Manual

Installing your device

Step 1: Insert the SIM card

Using a paper clip, press the SIM Eject button to eject the SIM card tray. Place the
SIM card in the tray and then insert the loaded tray into the SIM slot with the gold
side facing up, as shown below.
Insert
SIM
Card

Step 2: Attach the antennas

The NTC-140W Series router is shipped with caps on the Cellular, WiFi and GPS
antenna sockets. To attach the supplied antennas, first remove the socket caps
from the antenna sockets then screw the antennas onto the sockets by turning
them in a clockwise direction. Please refer to the
antenna socket layout. If you have purchased a GPS antenna, remove the socket
cap from the GPS antenna socket and attach the antenna to the socket in the
same manner.
8
I/O
i
USB
GPS
µSD
Cellular Main
SIM
I/O
i
USB
GPS
µSD
Cellular Main
SIM
-
+
LAN LAN/WAN
Cellular AUX
WiFi WiFi
-
+
LAN LAN/WAN
Device overview
Cellular AUX
WiFi WiFi
Press the SIM
Eject Button
section for the
Remove caps
then screw
antennas on