NetComm NTC-140W Series Quick Start Manual page 5

1
ITEM
1
Micro USB 2.0
OTG port
2
Reset button
3 Molex Mini-Fit™
receptacle
4 LAN port
5 LAN/WAN port
NTC-140W Series - 4G WiFi M2M Router
2
I/O
i
USB
DESCRIPTION
Provides connectivity for optional external storage or a USB Ethernet
dongle. Supplies up to 0.5A to connected device.
Press and hold for less than 5 seconds to reboot to normal mode.
The LEDs are green and extinguish in sequence to indicate that the
GPS
router will reboot normally if the button is released during this period.
µSD
Cellular Main
Press and hold for 5 to 15 seconds to reboot to recovery mode.
SIM
The LEDs are amber and extinguish in sequence to indicate that the
router will reboot to recovery mode if the button is released during
this period.
Press and hold for 15 to 20 seconds to reset the router to factory
default settings. The LEDs are red and extinguish in sequence to
indicate that the router will reset to factory default settings if the
button is released during this period.
Connect the provided power supply here. The Molex receptacle
provides:
• Ground (−)
• Power (+)
• I/O terminal
• (i) ignition input detection terminal.
LAN port for wired Ethernet clients.
LAN or WAN port for wired Ethernet clients or to bridge another
network connection.
4
3
-
+
LAN LAN/WAN
Cellular AUX
WiFi WiFi
5
5