Step 6: Connect To The Internet - NetComm NTC-140W Series Quick Start Manual

Step 6: Connect to the Internet

If the SIM Status is OK, the NTC-140W Series router automatically attempts to
connect to the Internet by detecting the correct APN and connection details.
If automatic configuration was unsuccessful, you must manually enter the
connection details.
To manually configure the connection profile:
1. From the top menu bar, select the Networking option.
2. Next to Profile1, click the
screen is displayed.
3. Ensure that the Automatic APN selection toggle key is set to the
OFF position.
4. In the APN field, enter the APN name that your carrier requires for mobile
broadband connection. If required, enter the Username and Password in the
Username and Password fields. Click the Save button.
The connection profile is now configured.
Verifying the connection status
Click on the Status menu item from the top menu bar. The Status page is
displayed. The mobile broadband connection is established successfully if the
Status field in the WWAN connection status section displays Connected.
12
button. The Data connection profile settings