Live Monitoring Menu - PACOM PDR960H-4E User Manual

User's Manual

Live Monitoring Menu

Login/Logout
Selecting (Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User
and enter the password to log into the system. Selecting
screen asking you to confirm whether or not you want to log out the current user.
Display
 Full Screen: Selecting
selected camera full screen. It is the same as pressing the individual camera buttons on the front panel or clicking
the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 1+5, 1+7 or 3x3). Clicking
the left mouse button on the screen again returns to the previous display mode.
 PIP, 2x2, 1+5, 1+7, 3x3: Selecting
the cameras in the selected multiview screen mode (PIP, 2x2, 1+5, 1+7 or 3x3). Selecting each display mode is the
same as pressing the
LAYOUT
of the multiview formats (i.e., 2x2, 1+5, 1+7 or 3x3).
NOTE: In the 1+5 or 1+7 display mode, the main channel indicates the channel displayed on the large screen
which is displayed in the top-left. You can select the camera you want to display on the main channel
screen. Select a channel on the screen and click the right mouse button to display the Camera Menu.
Selecting Go To Main swaps the selected channel with the main channel. This function is supported only in
the 1+5 and 1+7 display modes and can be activated from any of channel screens except the main channel
screen.
 Camera OSD, Status OSD: Selecting
or Status OSD On and Off.
Previous Group, Next Group
Selecting or (Previous Group or Next Group) in the Live Monitoring menu moves to the previous or next page.
Freeze
Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select
It is the same as pressing the
while in the Freeze mode can also exit the Freeze mode. While in the Freeze mode, the icon
corner if Freeze is selected in the Display setup screen (OSD tab).
Alarm
Selecting (Alarm) in the Live Monitoring menu resets the DVR's outputs including the internal buzzer during an alarm.
Panic
Selecting (Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting
panic recording. It is the same as pressing the
Sequence
Selecting (Sequence) in the Live Monitoring menu causes the cameras to display sequentially. It is the same as
pressing and holding the
MENU
will cause the DVR to go through predefined screen layouts (Full Sequence). Or, the bottom, right screen will display
live cameras sequentially (Cameo Sequence). For example, if you select
changes pages as follows:
54
(Logout) in the Live Monitoring menu displays the Logout
(Display) → (Full Screen) and choosing the camera number button displays the
(Display) →
button on the remote control or scrolling the mouse wheel up and down when in one
(Display) → Camera OSD or Status OSD toggles Camera OSD
(Play/Pause) button. Pressing any button except for the
button.
PANIC
button for three seconds or longer. When in one of the multi-view formats, selecting
, , , or (PIP, 2x2, 1+5, 1+7 or 3x3) displays
in the 2x2 format, the 8-channel DVR
again.
and buttons
MENU PANIC
displays in bottom-left
again stops