Replacing Orifi Ce Holders; Surface Burner Valves; Removing Door Latch Hook Assembly - Electrolux 30” GAS FREESTANDING RANGES Service Update Manual

B B
EFORE ATTEMPTING TO REMOVE THE ORIFICE HOLDER EFORE ATTEMPTING TO REMOVE THE ORIFICE HOLDER
ASSEMBLY OR BURNER VALVES MAKE SURE THAT THE ASSEMBLY OR BURNER VALVES MAKE SURE THAT THE
GAS SUPPLY TO THE RANGE IS TURNED OFF GAS SUPPLY TO THE RANGE IS TURNED OFF
The orifi ce holder and gas line are one assembly.
To remove the orifi ce holder assembly disconnect To remove the orifi ce holder assembly disconnect
the compression nut that secures the gas line the compression nut that secures the gas line
to the burner valve. The orifi ce assembly should to the burner valve. The orifi ce assembly should
now be completely free from the range. now be completely free from the range.
Disconnect the compression nut that secures the
orifi ce assembly gas line to the valve.
Remove the valve mounting screw from the top Remove the valve mounting screw from the top
side of the manifold tube. The valve can now be side of the manifold tube. The valve can now be
pulled out of the manifold tube from the bottom. pulled out of the manifold tube from the bottom.
IMPORTANT NOTE: IMPORTANT NOTE:
burner valve always insure that the washer on burner valve always insure that the washer on
the burner screw and valve body is undamaged the burner screw and valve body is undamaged
and properly positioned and properly positioned
To remove the door latch hook assembly remove
the two screws that secure it to the front oven
chassis.
After the screws are removed the latch hook
assembly can be removed from the chassis and
the connecting rod can be disengaged.
Removing and Replacing Orifi ce Holders
. .
Removing and Replacing Surface Burner Valves
When reinstalling the When reinstalling the

Removing Door Latch Hook Assembly

Valve
Mounting
Screw
DOOR LATCH HOOK ASSEMBLY
WITH CONNECTING ROD ATTACHED
Page 23
Orifi ce Holder
Assembly
Compression
Nut
Washer
Burner Valve
MOUNTING SCREWS
LATCH HOOK
P/N 316439221
& Screw