Oven Door; Remove And Replace Oven Door - Electrolux 30” GAS FREESTANDING RANGES Service Update Manual

The door construction has changed substantially. The door hinges had previously been mounted in
the chassis. The new construction moves the hinges to the interior of the door.
To service or replace many of the components of the oven door it is often necessary to remove the
door from the range. Below are instructions for removing and reinstalling the oven door. This informa-
tion is also found in the owners guide.
To Remove Oven Door:
1. Fully open the oven door (horizontal with fl oor).
2. Pull the door hinge locks on both left and right
door hinges down from the oven frame com-
pletely towards the oven door (See photo A). A
tool such as a small fl at-blade screwdriver may be
required.
3. Close the door until it contacts the hinge locks.
4. Firmly grasp both sides of oven door along the
door sides (Do not use the oven door handle).
5. Lift the oven door hinge arms over the roller
pins located on each side of the oven frame (See
Photo B).
! CAUTION !
The door is heavy. For safe, temporary storage, lay the door
fl at with the inside of the door facing down.
To Reinstall Oven Door:
1. Firmly grasp both sides of oven door along the
door sides (Do not use the oven door handle).
2. Holding the oven door at the same angle as the
removal position, seat the hook of the hinge arm
over the roller pins located on each side of the
oven door frame.
3. Fully open the oven door (horizontal with fl oor).
4. Push the door hinge locks up towards and into
the oven frame on both left and right oven door
hinges to the locked position.
5. Close the oven door.

OVEN DOOR

Photo A
Photo B
LIFT DOOR HINGE ARMS OVER ROLLER PINS
Page 33
PULL HINGE LOCK DOWN
↑
↑
P/N 316439221