Remote Transmitter Operating Instructions - Mendota DT3-PF2-LX Operating Instructions Manual

REMOTE TRANSMITTER OPERATING INSTRUCTIONS

TO TURN ON THE APPLIANCE:
1. Press the ON/OFF button. The transmitter display will show all active icons on the screen.
2. Select the Thermostat Mode by pressing the Thermostat Key: OFF (meaning Manual
Mode), ON (meaning normal Thermostat) or Smart (meaning Smart Mode).
a. In OFF (Manual Mode), the appliance will ignite and start on HI.
b. In ON (Normal Thermostat Mode), the appliance will only ignite if the Set Temperature
is greater than the Room Temperature.
c. In SMART (Smart Mode), the appliance will only ignite if the Set Temperature is greater
than the Room Temperature.
TO TURN OFF THE APPLIANCE, press the ON/OFF button.
MODE KEY
various available functions: Flame Height, Fan Speed, Accent
Light Dimmer and Secondary Burner On/Off.
Flame Height:
6 flame height Levels are available. While the Flame
Height Icon is displayed, pressing the Up or Down button once
will increase or decrease the flame height by 1 of 6 increments.
If the flame height is at Level 1 and the Down button is
pressed, all burners will turn OFF. If in IPI mode, the pilot light
will also extinguish. If in Standing Pilot Mode, the pilot light will
remain ON. Note: If in SMART model, the flame height function
is not available for manual adjustment. In SMART mode, the flame height
regulates automatically.
Fan Speed Control:
and OFF. To activate this function, press the MODE Key to index to the
fan control icon. Use the UP/Down Arrow Key to turn ON, OFF or adjust
the fan speed. A single "beep" will confirm reception of the command.
Once you set the desired fan control, the system will remember your
selected fan speed until you manually change it.
Accent-Light Dimmer:
tions. Pressing the UP key in this mode will TURN ON the Accent
Light and allow you to control the brightness of the Accent Light in 6
steps. A single "beep" will confirm reception of the command. Once
you set the desired light brightness, the system will remember your
selected brightness level until you manually change it.
Secondary Burner:
feature. Pressing the UP Key in this mode will TURN ON the Sec-
ondary Burner and Pressing the DOWN Key will TURN OFF the
Secondary Burner. The flame level will not change when you turn
the Secondary Burner On or Off. The flame level can only be
changed in the Flame Level mode.
35
: Pressing the MODE KEY toggles between the
The fan speed can be adjusted through six (6) speeds
This function controls the Mendota Accent Light func-
This function controls the Secondary Burner's ON/OFF