Mendota DT3-PF2-LX Operating Instructions Manual page 32

Place small coals between Firebox Front and front Burner. Pile the coals higher near the Front burner to build height. Any
excess coals should be spread on the far left and far right sides of firebox to extend the coal bed effect. A couple of coals
may be place behind front burner tube on Ember Bed "A" but sparsely. Avoid covering front burner tube's gas ports.
Hold a clump of Inswool/ Rockwool in one fist tightly with a small portion protruding out. Brush
Inswool/Rockwool over top of front burner tube, over Ember Bed "A" and over entire log assembly. Brushed
Inswool deposits should be a thin layer but enough to hide the front burner tube. Brush generously over
front ember bed and all logs. Also brush lightly over center burner tube and rear burner tube. Be carefuly
when brushing on middle and rear burner tubes. Do not deposit large chunks of inswool on middle or rear
burners. Attempt to break inswool into small fibers as you brush.
31