Mendota DT3-PF2-LX Operating Instructions Manual page 31

23.
25.
30
Once Log "I" is pinned to the
middle pin in Log "D", rotate
FRONT –MOST TIP of Log "I" so
that it is 2 inches to the left of
the Right-Most Grate Bar.
Place Log "J" as shown here. You will
find that it sits down well and "self-
positions" on the ember bed. You may
rotate the position of this log as it
suites your taste. Exact position is not
critical.
22. Identify Log "I". Log "I" will be
installed in the middle of the
fireplace, with the hole on the
bottom of the log setting on the
middle pin in log "D".
24. Identify Log "J". This log is
designed to hide the pilot light
flames and also to aid in the front
ember-bed glow effect and
realism.
I
2" gap