Cloning - Icom iC-A210E Instruction Manual

D Data cloning
Cloning allows you to quickly and easily transfer the
programmed contents or data from a PC to a transceiver
using the optional CS-A210
CLONING SOFTWARE
Data can be cloned to and from a PC (IBM compatible) using
the optional CS-A210
CLONING SOFTWARE
1529R (connect with the data jack). Consult the
CLONING CABLE
CS-A210 instruction manual and HELP file for details.
D Displayed Message
• While clone writing.
CLONE
WRITE
• When clone writing is finished properly.
CLONE
WRITE OK
.
and the optional OPC-

CLONING

• When clone writing error occurs.
CLONE
WRITE ERR
• While clone reading.
RX
127.00
• When turn the power OFF/ON after clone writing error oc-
curs.
(The transceiver boots with Error mode.)
In this case, Clone writing correctly data to the transceiver is
necessary to cancel the error.
CLONE
NO DATA
7
MEMORY
CLONE
READ
06
07
27