Memory Operation; I Programming Notes; Blank Channel; I Entering Memory Mode - Icom iC-A210E Instruction Manual

I Programming notes

ï Blank channel
A memory or group channel with no frequency content is
called as a blank channel. When a blank channel is selected
while memory programming, "–––––" appears instead of a
frequency.
ï Memory protect function
IC-A210E has a memory protect function. The function pre-
vents accidental changes or deletion.
The function can be set in the MENU mode.

I Entering memory mode

• Push [RCL] to enter the memory mode.
• Push [RCL] to set the selected memory channel frequency
to the standby frequency, then exit the memory mode.
• Push and hold [RCL] for 2 sec. to exit the memory mode
(The standby frequency is set the frequency before enter-
ing the memory mode ).

I Memory channel type

The transceiver has 4-memory* channel types as follows.
*The GPS receiver is necessory when using GPS memory channel.

MEMORY OPERATION

ï Regular memory channel (MEMORY)
There are up to 10 available memory channels.
The following functions are available:
REPLACE, DELETE, REVIVE and CHANNEL NAME EDIT
functions.
ï Group memory channel (GRP01–GRP20)
There are up to 200 group channels (10 CH × 20 Groups).
The following functions are available:
REPLACE, DELETE, REVIVE, GROUP NAME EDIT and
CHANNEL TAG functions.
ï History memory channel (HISTORY)
There are up to 10 available history memory channels.
The active frequency is written into history memory channels
automatically when pushing [↔] to exchange the active and
standby frequency.
ï GPS memory channel (GPS)
There are up to 10 available GPS memory channels.
When connected to an external GPS receiver* equipped with
an airport frequency database, the frequency data such as
nearby airports can be transferred into GPS memory chan-
nels .
* Ask your dealer for available GPS receiver details.
3
02
03
9