Scene Mode Scheduler; Encoder Profile - Bosch NPD-5512-Z30 User Manual

AUTODOME IP starlight 5000i
Spatial noise filtering
Adjusts the spatial noise filtering level between -15 and +15. The higher the value, the more
noise filtering.
Intelligent Defog
With the Intelligent Defog mode feature, visibility can be improved significantly when viewing
foggy or other low-contrast scenes.
Select Auto to activate the Intelligent Defog feature automatically as needed.
Select Off to disable the feature.
6.6

Scene Mode Scheduler

The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
2.
3.
6.7

Encoder Profile

For the video signal encoding, you can select a code algorithm and you can change the presets
for the profiles.
You can adapt the video data transmission to the operating environment (for example network
structure, bandwidth, data load). To this end, the camera simultaneously generates two data
streams (Dual Streaming), which compression settings you can select individually, for example
one setting for transmissions to the Internet and one for LAN connections.
Pre-programmed profiles are available, each giving priority to different perspectives.
You can change individual parameter values of a profile and you can also change the name.
You can switch between profiles by clicking the appropriate tabs.
Caution!
The profiles are rather complex. They include a large number of parameters that interact with
one another, so it is generally best to use the default profiles.
Change the profiles only once you are fully familiar with all the configuration options.
Note: In the default setting, Stream 1 is transmitted for alarm connections and automatic
connections.
Notice!
All parameters combine to make up a profile and are dependent on one another. If you enter
a setting that is outside the permitted range for a particular parameter, the nearest permitted
value will be substituted when the settings are saved.
Profile name
If required, enter a new name for the profile.
Bit rate optimization
Select the appropriate rate for bit rate optimization.
Options are Off, Maximum quality, High quality, Medium (default), Low bit rate, Minimum bit
rate.
Averaging period
Select the appropriate averaging period as a means of stabilizing the long term bit rate.
Bosch Security Systems
Select the mode you wish to use during the day from Marked range drop-down box.
Select the mode you wish to use during the night from Unmarked range drop-down box.
Use the two slider buttons to set the Time ranges.
User Manual
Camera | en 29
2018.11 | 1.1 |