Operating Access Points In Managed Mode; Status Displays, Interfaces And Hardware Installation; Status Displays - Lancom L-54g Wireless Manual

LANCOM L-54g Wireless - LANCOM L-54ag Wireless - LANCOM L-54 dual Wireless
Chapter 2: Installation

2.2.2

Operating access points in managed mode

LANCOM Wireless Routers and LANCOM Access Points can be operated either
as self-sufficient Access Points with their own configuration ("Access Point
mode") or as components in a WLAN infrastructure, which is controlled from
a central WLAN-Controller ("managed mode").

2.2.3

Status displays, interfaces and hardware installation

2.2.4

Status displays

Front side
The LANCOM L-54ag Wireless and LANCOM L-54g Wireless have status dis-
plays on the front panel.
LANCOM L-54 dual
Wireless
LANCOM L-54g
Wireless
LANCOM L-54ag
Wireless
Top panel
Two additional LEDs on the top panel provide a convenient overview of the
most important status information, especially when the device is mounted
vertically.
14
Wireless LAN adapter or LAN access (if the access point is to be connected
to the LAN).
The LANtools also require a Windows operating system. A web
browser under any operating system provides access to WEBconfig.
For operation in managed mode the Access Points require firmware of
version 7.22 or higher and a current loader (version 1.86 or higher).
² ¶
L-54 dual Wireless
L-54ag Wireless