Installing The Lancapi Client - Lancom Office Series Manual

d Activate the LANCAPI server for the outgoing and incoming calls ('On'), or
8.3

Installing the LANCAPI client

You must have administrator rights to install the LANCAPI client on a system
running Windows XP or Windows 2000.
a Place the LANCOM CD in the CD-ROM drive of the client PC. If the setup
b Select the Install LANCOM software entry.
c Highlight the LANCAPI option. Click Next and follow the instructions for
The LANCAPI client will start automatically from now on. Its status is dis-
played by the new icon in the Windows system tray (next to the clock).
allow only outgoing calls ('Out').
If you would like the LANCAPI server to accept incoming calls, enter all
of the MSNs on which the LANCAPI should answer calls in the 'Sub-
scriber Numbers (MSN/EAZ)' field. Use semicolons to separate multiple
numbers. If you do not enter a subscriber number here, the LANCAPI will
answer all incoming calls on the local ISDN connection. Confirm your
entries with Apply.
program does not automatically start when you insert the CD, simply click
'autorun.exe' in the main directory of the LANCOM CD in the Windows
Explorer.
the installation routine. Finally, restart the computer if required.
=active
|
Office communications with the LANCAPI
= error
51
= inactive
| |
LANCOM Office