Configuration Protection - Lancom L-54g Wireless Manual

LANCOM L-54g Wireless - LANCOM L-54ag Wireless - LANCOM L-54 dual Wireless
and would like to assign it a user-defined address from one of the
address ranges reserved for private use, for example '10.0.0.1' with
a network mask of '255.255.255.0'. If you do this you simultaneously
specify the address range that the DHCP server will subsequently use
for the other devices in the network (provided the DHCP server is acti-
vated).
You have so far also used IP addresses on the computers in the LAN.
Required information for manual TCP/IP configuration
When performing manual TCP/IP configuration the Setup Wwizard prompts
you for the following information:
DHCP mode of operation
Off: The IP addresses required must be entered manually.
Server: The Access Point operates as DHCP server in the network; as a
minimum its own IP address and the network mask must be assigned.
Client: The Access Point obtains its address information from another
DHCP server; no address information is required.
IP address and network mask for the Access Point
Assign the Access Point a free IP address from your LAN's address range
and enter the network mask.
Gateway address
Enter the gateway's IP address if you have selected 'Off' as the DHCP
mode of operation or if another network device is assuming the role of
gateway in the 'Server' mode of operation.
DNS server
Enter the IP address of a DNS server to resolve domain names if you have
selected 'Off' as the DHCP mode of operation or if another network device
is assuming the role of DNS server in the 'Server' mode of operation.
3.1.2

Configuration protection

Using a password secures access to the Access Point's configuration and thus
prevents unauthorized modification. The device's configuration contains a
great deal of sensitive data such as data for Internet access and should be
protected by a password in all cases.
Multiple administrators can be set up in the configuration of the

LANCOM, each with differing access rights. Up to 16 different admi-
Chapter 3: Basic configuration
27