Point-To-Point Connections - Lancom L-54g Wireless Manual

LANCOM L-54g Wireless - LANCOM L-54ag Wireless - LANCOM L-54 dual Wireless
Point- to-point settings
The configuration of P2P connections involves setting not only the operating
mode but also the station name that the Access Point can connect to. Also,
the role as "Master" or "Slave" is set here.
Along with the settings for the Access Point itself, also to be defined is the
remote site that the Access Point can contact via the P2P connection.
For further information please refer to section
5.2

Point-to-point connections

LANCOM Access Points can serve not only as central stations in a wireless net-
work, they can also operate in point-to-point mode to bridge longer dis-
tances. For example, they can provide a secure connection between two
networks that are several kilometers apart — without direct cabling or expen-
sive leased lines.
BUILDING
WLAN Router
The behavior of an access point when exchanging data with other access
points is defined in the "Point-to-point operation mode".
Off: The access point only communicates with mobile clients
To: The access point can communicate with other access points and with
mobile clients
Exclusive: The access point only communicates with other base stations
In the 5 -GHz band, the automatic search for vacant WLAN channels can lead
to several simultaneous test transmissions from multiple access points, with
Chapter 5: Advanced wireless LAN configuration
ANTENNA
→
Point-to-point connections.
BUILDING
ANTENNA ACCESS POINT
BUILDING
ANTENNA ACCESS POINT
47