Install&User Manual
Display information
Display information is to configure which information will be shown on live view and playback
view. In live view, time,channel name, event, recording status, HDD, remote controller ID, text
can be set and in playback view, time,command,channel name, event, text can be configured.
6.4.3
Audio Setup
With this menu, user can configure Voice Channel, Audio recording, Volume, Synchronization,
Mixing.
Voice Channel
Select audio to use
Recording
Configure yes or no of using audio recording. If no, audio will be out only in live view and if yes,
Audio will be out in both view modes.
Volume
Configure volume by +, - direction
Synchronize Video Channel
Configure which channel is matched with the input audio. But this function is applied only on
recording. Audio out in live view will be covered in Voice Mixing below. Default set is Auido no.1
to channel no.1.
Voice mixing
84