1. Manuals
  2. Brands
  3. WebGate Manuals
  4. DVR
  5. MD1600L eDVR
  6. Installation manual

WebGate MD1600L Installation Manual

Hide thumbs Also See for MD1600L:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
eDVR Installation Guide
MD1600L
(v 1.0)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MD1600L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for WebGate MD1600L

Summary of Contents for WebGate MD1600L

  • Page 1 Installation Guide MD1600L (v 1.0)

  • Page 2: Fcc Compliance Statement

    Caution Since this device is operation purpose and registered as suitable electromagnetic waves, seller or user should be cautios on this point. If the device is sold or purchased wrongly, it is required to replace as Home use. FCC Compliance Statement Caution : Any changes or modifications in construction of this device which are not expressly approved the party responsible for compliance could void the user's authority to operate the equipment.
  • Page 3 When eDVR is installed, be cautious to locate on safe places where children are unreachable. 6. If eDVR does not operate properly, please contact the closest WEBGATE distributor for after sales service. Tempering or disassembling the product will void warranty.

  • Page 4: Table Of Contents

    5.1. Using menu ......................... 14 5.2. Dialogue box to edit a word ..................15 Setting remote controller ...................... 16 6.1. Setting ID of MD1600L ....................16 6.2. Selecting MD1600L ..................... 17 6.3. Operable range of remote controller ................17 6.4.
  • Page 5 ......................39 10.2. Connecting eSATA Device ..................39 10.3. Available HDD ......................40 10.4. Registering & Formating HDD .................. 40 Network monitoring & managing ..................41 11.1. Connecting Ethernet ....................41 11.2. Configuring Network infomraiton of MD1600L ............42...
  • Page 6 Using Control Center Lite ....................43 12.1. Starting ........................43 12.1.1. PC system requirements for running Control Center Lite .......... 43 12.2. Installing Control Center Lite ..................43 12.3. Log-In ........................44 12.4. Configuration Tool ....................45 12.5. Monitor ........................45 12.6.

  • Page 7: Overview

    OVERVIEW 1. What is MD1600L? The eDVR MD1600L is a 16-analog channels network digital video recorder. Video, Audio, Text and Event-Logs are digitized and stored on two internal Hard-Drives - It supports 16ch video - Supports 1 ch bi-directional audio - Supports recording, playback, network recording, network playback simultaneously (Pentaplex) - Max.

  • Page 8: Supplied Accessories

    2. Supplied accessories Unpack and check all the items as below; 1. eDVR MD1600L (1EA) 2. AC Power Cord (1EA) 3. CD (Including Software) (1EA) 4. Remote Controller (1EA) 5. RACK FIXING KIT (1SET)

  • Page 9: Description & Function

    3. Description & Function MD1600L front (1) Power switch (2) Function buttons (3) LED (4) I/O port cover (5) USB port (6) Remote controller receiver...
  • Page 10 MD1600L rear (1) AC power connector (2) BNC connector for video output (3) BNC connector for monitor output (4) BNC connector for monitor output (5) Terminal block for sensor, relay, and serial input/output (6) eSATA connector (7) Ethernet connector (8) GND...

  • Page 11: I Stallatio A D Co Ectio

    Impedance is set as 75 basically. If connecting a device to video output, impedance will be “Hi- z” status. Please refer to “9.6 connecting Video In/Output” on page 12 Video Type(NTSC/PAL) should be changed after opeting MD1600L. The order of camera recognition follows Ch1 camera through Ch16 camera and 1 recognized camera type leads other camera type.

  • Page 12: Connecting Monitor

    4.2. Connecting monitor (1) Connect CCTV monitor to MD1600L with BNC cable as shown below; 4.3. Connecting Audio (1) Connect auto signal to MD1600L with using RCA cable.

  • Page 13: Supplying Power

    When supplying power, MD1600L starts booting automatically. 2. In order to cut off power, press the power switch on MD1600L front during 4 seconds and enter admin password after appearing a pop window. 3. For supplying again, push the power switch.

  • Page 14: Running Osd Menu

    5. Running OSD menu 5.1. Using menu Press the [MENU] in keypad of front to open the OSD Configuration Menu ① Main Menu ② Sub-menu ③ Setting Page (1) Main Menu : The selected tab is shown in blue and the related sub-menu will be shown below the tab.

  • Page 15: Dialogue Box To Edit A Word

    5.2. Dialogue box to edit a word There are two methods to input a word.. (1) Entering words Move pressing [▶] arrow button to enter next word until the word is looking for is shown using [▲/▼] arrow buttons. In case of spacing words, press [▶] to move one space and enter the word. To exit the Dialogue box, press the [▷] arrow button.

  • Page 16: Setting Remote Controller

    6. Setting remote controller When controlling several eDVRs with one remote controller, set Remote Contorl ID as follows. 6.1. Setting ID of MD1600L (1) Press the [MENU] button (2) Select “System” with using [▶] button and press the [▷] or [▼] button (3) Select “Miscelleaneous”...

  • Page 17: Selecting Md1600L

    Selecting MD1600L If several eDVRs are set with unique ID numbers, they can be controlled with one remote controller. To select a specific eDVR (MD1600L), Keep pressing the ID button of remote controller until a buzzer sounds during 2 seconds.

  • Page 18: Md1600L Configuration

    7. MD1600L configuration 7.1. Basic configuration 7.2. Advanced configuration...

  • Page 19: External Storage & Back Up Configuration

    7.3. External storage & Back up configuration 7.4. Internet/ Intranet configuration...

  • Page 20: Edvr Md1600L Basic Setting

    8. eDVR MD1600L basic setting 8.1. Viewing Image When power is on, MD1600L starts automatically and images are displayed in basic 16ch-split screen after the booting. < ote> If user password is set, a prompt for entering the password will appear. Facotry default is reserved as...

  • Page 21: Setting Date & Time

    8.2. Setting Date & Time (1) Press [MENU] button and select “Quick Setup” tab. (2) Select “Date/Time” using the [▷] or [▼] and press [EXIT] button. 8.2.1. Time Zone (1) Select “Time Zone” using the [◀/▶] or [▲/▼] buton and press [▷] to configure. (2) Select Time Zone using the [◀/▶] button and press [EXIT].

  • Page 22: Time Format

    8.2.4. Time Format (1) Select “Time Format” using the [◀/▶] or [▲/▼] button and press [▷] button.. (2) Two time formats are available; ‘DD/MM/YYYY,’ ‘MM/DD/YYYY’, ‘YYYY/MM/DD’; Select a value using [▲/▼] buttons and press the [EXIT] button when it is finished. (Factory default is set as ‘MM/DD/YYYY’) 8.2.5.

  • Page 23: Setting Recording Condition

    8.3. Setting recording condition Recording conditions under the “Quick Setup” menu tab apply the same values to all analog channels 1~16. All settings are applied for 24 hours/ day regardless of the value set for “Time Schedule” or “Alarm Rec.” (1) Press [MENU] button and select “Quick Setup”...

  • Page 24: Recording Speed/Quality

    8.3.2. Recording Speed/Quality (1) Select “Recording Speed/ Quality using [▲/▼] buttons and press [▷]. (2) Select a value using the[◀/▶] button. Press the [EXIT] button when it is finished. 8.3.3. Speed(ips) When “Recording Speed/Quality” is set as” Custom”, values can be set manually. (1) Select “Speed”...

  • Page 25: Connecting And Configuring Dio Ports

    9.1. Connecting and configuring sensor 9.1.1. Specification In order to run sensor input of eDVR MD1600L normally, the following conditions are required. Input Ch. 16Ch Photo coupler inputs Input type N.C (Normal Close)/ N.O. (Normal Open) type.

  • Page 26: Connecting Sensor Input

    Connect S1 ~ S16 with referring to the followings. It shows to connect a dry contact (Please refer to “< ote> Wire Handling” on page 27). When connecting a non-dry contact type of sensor (e.g. Open collector output) please contact WEBGATE’s customer Support team.

  • Page 27: Configuring Sensor At Osd Menu

    9.1.3. Configuring sensor at OSD menu (1) Press the[Menu] button and select “Alarm Source”. (2) Press [▷] or [▼] button to move to Sub-Menu, select “Sensor” and press [▷]. 9.1.3.1. Global Use when selecting all 16 sensors simultaneously, which can be selected as “Do not use”(Off). “Normal Open”...

  • Page 28: Connecting & Configuring Relay Out

    Please refer to “Alarm Rec” for saving and “Alarm Act” for relay-out on the “eDVR User’s Guide” 9.2. Connecting & configuring relay out 9.2.1. Specifications In order to run relay output of eDVR MD1600L normally, the following conditions are required. Output Ch. 4Ch relay differential outptus Output type Dry Contact Spec.

  • Page 29: Connecting Relay Out

    9.2.2. Connecting relay out Connect R1 ~ R4 with referring to the followings, It shows to connect a warming light. Please refer to “< ote> Wire Handling” on page 27.

  • Page 30: Configuring Relay Out As Osd Menu

    9.2.3. Configuring relay out as OSD menu. Relay can run by sensor or MD and its condition can be set differently according to schedule. When using the [Relay] button + [Number] button on the front panel or Control Center Lite-D S/W, relay can be operated from remote site.

  • Page 31: Connecting Serial Port

    Connecting serial port 9.3.1. Configuring serial ports for Pan/Tilt/Zoom The MD1600L have most major PTZ protocols already pre-programmed. Makes and models not supported can still be controlled using the Transparent Protocol. For a list of supported protocols, refer to the list on the OSD Configuration menu.

  • Page 32: Diagram Of Serial Ports

    9.3.2. Diagram of serial ports 9.3.2.1. Diagram of COM1(RS232) 9.3.2.2. Diagram of COM2(RS485) 9.3.2.3. Diagram of COM3(RS485)

  • Page 33: Configuring Serial

    9.3.3. Configuring Serial Configure PTZ COM ports and available models at “System/ Serial Setup” in MD1600L. After completing serial setup, configure base address or port for each channel at “ Camera menu” tab. When connecting PTZ devices to several cameras, be sure base address matches address for the camera.

  • Page 34: Connecting External Device With Serial Port

    9.4. Connecting external device with serial port 9.4.1. Connecting text inout device (ATM / POS / Access Control) The MD1600L can record text data received from POS/ATM through the COM/RS232 serial port. Connect to COM1/RS232 (15Pin D-Sub) of MD1600L and configure the “Serial Setup” sub-menu under...

  • Page 35: Configuring Serial Setup (Com1) At Osd Menu

    9.4.2. Configuring serial setup (COM1) at OSD menu (1) Set the “System” in OSD menu and move to “Serial Setup” menu. (2) Select COM in “Serial Setup”, set Devices as “Text”. (3) Set Baud Rate/ Parity/ Stop bit with referring to manual of the connected external device.

  • Page 36: Configuring Text

    (1) Select the “Alarm Source” menu among OSD menus. (2) Select the “Text” and set each value. < ote> Before installing any external device, consult with the local WEBGATE distributor. Some external devices may not be compatible with the eDVR.

  • Page 37: Connecting Usb Device

    9.5. Connecting USB device USB port can be used to copy up to 1 minute of images to a USB Flash memory disk. When connecting USB Device, do not exceed the rated values of USB device as below; USB Spec. Ver 1.1 (Max 12M bps) Available Device USB Memory Stick,...

  • Page 38: Connecting Video In/Output

    9.6. Connecting video in/output eDVR’s video in/output is composed of Loop Through. eDVR recognizes the connection status and video impedance automatically. For example, when eDVR is connected by only video input, the video impedance is set as 75 . And when video in/output is connected simultaneously, the video impedance is changed as Hi-z.

  • Page 39: Connecting External Storage

    When using FireWire supported external eSATA, hard drive bays can be connected to 1 ports in the rear panel. The MD1600L do not supply power to the hard drive bay; therefore only bays that use external power can be used.

  • Page 40: Available Hdd

    10.3. Available HDD It is recommended to use following HDD models with the MD1600L. If a non-recommended HDD is used, WEBGATE Inc. will guarantee the warranty. 10.4. Registering & Formating HDD “Disk Manager” will automatically run on start-up installing a HDD as below;...

  • Page 41: Network Monitoring & Managing

    (9) Shut down “Disk Manager” by pressing [EXIT] button. 11. etwork monitoring & managing MD1600L can be accessed, controlled, and managed from remote site using PC via Internet/ Intranet, which is same way as local access for controlling & monitoring features.

  • Page 42: Configuring Network Infomraiton Of Md1600L

    11.2. Configuring etwork infomraiton of MD1600L The following description is based on Ethernet connection. For more detailed information on the Network setting page and way of using xDSL, please refer “eDVR USERS’ GUIDE”. (1) Press [MENU] button (2) Select “System” using the [◀/▶] buttons and press the [▷] button.

  • Page 43: Using Control Center Lite

    12. Using Control Center Lite Control Center List is a DVR Management Software and it makes DVR installtion & setting more easier throguth a PC which is connected with DVR in Network. All configuration could be handled in OSD menu of DVR without a PC, however, Control Center Lite makes the complete setting more simply. 12.1.

  • Page 44: Log-In

    3> Select components which wish to install and press “Next” button. “WESP SDK” must be installed. 4>.Click the “Install” button after selecting a directory to be insatalled. 12.3. Log-In Enter User Name, Password and press “Ok” button. The factory default value : User Name:Administrator, Password:admin...

  • Page 45: Configuration Tool

    Click the icon on the desk top to run “Control Center Lite Configuration Tool”. 12.5. Monitor * Max. 5 users could be connected simultaneously in one unit of MD1600L. Click the icon on the desk top to run “Control Center Lite Monitor”.

  • Page 46: Playback

    12.6. Playback * Max. 2 user could be connected for playback in one unit of MD1600L. Click the icon on the desk top to run “Control Center Lite Playback”.

  • Page 47: Appe Dix

    APPE DIX APPENDIX APPE DIX...

  • Page 48: Hdd

    #1. HDD #1.1. Fundamental notions & terms eDVR storing constructure (VFS2) eDVRL has a peculiar storing constructure, and its features are as follows. (1) It is possible to connect 2 sets of HDD internally (Internal, ATA Interface) and 63 sets of HDD externally (External, 1 ports of eSATA).
  • Page 50 (2) HDD Type at Disk Manager Available recording status Connected and formatted as eDVR’s file system. If using ‘Add Used’ command, it will be changed to [R]. There is no need to format. Connected but not available eDVR’s file system. After using ‘Add’, need to format for making as [R].

  • Page 51: Installing Hdd

    #1.2. Installing HDD Compatible HDD It is recommended to use the following HDD models with the MD1600L. If a non-recommended HDD is used, WEBGATE Inc. will not guarantee the warranty. Installation and extension of internal HDD-RACK HDD In case of installation/adding or exchange HDD, follow the procedure as followings (1) Cut off the power to eDVR.
  • Page 52 (4) Fix the HDD into HDD Bracket with provided screws. Assemble an earth cable with HDD. < < < < ote> > > > When assembling a HDD, the back side of HDD should be with HDD BRACKET shown as above figure.
  • Page 53 (5) Assemble cables according to the following numbers. (6) Fix the assembled HDD and earth cable into case with screws. (7) Assemble the top cover. < ote> Caution for HDD Management Replacing ‘SLAVE’ HDD of internal 2 HDDs causes permanent data loss in the SLAVE HDD. MASTER HDD has all the index of stored data including ‘SLAVE’...
  • Page 54 (3) Select “Action” as “Add”, configure a size of alarm partition, and press “Apply” button. Then [F] is changed to [R]. (4) Press the [EXIT] button to shut down “Disk Manager”. (If recording schedule is set, MD1600L will start recording.)
  • Page 55 Expending External HDD (When using internal HDD as primary disk) MD1600L use eSATA as external storage device interface, and has one ports of eSATA MD1600L supports upto 8TB storage. < ote> Some eSATA ports may not be recognized by the MD1600L. Before purchasing, consult the local WEBGATE distributor.
  • Page 56 When using Disk Farm The following description is when MD1600L has internal primary disk and 1 sets of eSATA HDD. (1) When external HDD farm is connected to eSATA port, “Disk Manager” runs automatically. If not, run it manually in “Menu Utility Disk Manager”.
  • Page 57 When using RAID The following description is when MD1600L has internal primary disk and 1 set of IEEE1394 RAID. < ote RAID> Even though several HDDs are connected to RAID, MD1600L will recognize them as only one HDD. For connection and setup of RAID, please refer to the manual of related device.

  • Page 58: Replacing Hdd

    Replacing HDD Checking HDD MD1600L file system (VFS2) sensors bad sector automatically, and the sensored bad sector is not used. The following means when HDD is broken or has some problem in connection. (1) When playback is stopped or MD1600L is rebooted in specific playback range or image searching per event is impossible.
  • Page 59 For more detailed information of Control Center Lite-D’s backup, please refer to the “eDVR User’s Guide”. Caution in using HDD For handling or guaranteeing HDD, WEBGATE follows HDD guaranty condition. WEBGATE doesn’t bear the responsibility about data loss by user’s mistake in operating. < ote>...

  • Page 60: Using Cd-Rom

    #2. Using CD-ROM Components of CD- ROM disc Installation Guide : eDVR MD1600L Installation Guide User’s Guide : eDVR MD1600L User’s Guide : Control Center Lite-D User’s Guide Control Center Lite-D (Control Center lite-D Remote Management Program) Acrobat Reader : Version 7.0 Preparation To read manual of CD-ROM disc, Adobe Acrobat 7.0 should be installed in client’s PC.

  • Page 61: How To Recognize Manufacturing Date

    #3. How to recognize manufacturing date The manufacturing date by Webgate can be recognized by S/N(Serial Number) attached at the each product. S/ : Serial umber Management number for each Webgate product to combine twelve alphabet character and digit including...

  • Page 62: Specification

    #4. Specification General 32bit RISC Processor 32MB Flash memory 128MB Main memory Embedded LINUX 16Ch. analog video inputs via BNC connector Video channel NTSC or PAL video format are supported (Auto detect) Int.: 2 HDD bays including Storage device Ext: 1 eSATA connection ports Supports Disk management tool for all disks.

  • Page 63: Monitor Output

    Daily : Day / Night / Four-segment time frame Schedule recording Weekly : Weekdays / Weekends, Exception days Conditions : Normal / Event POS/ATM transaction information archived along with Text Data recording corresponding video data Manual(Emergency) record triggered by font key Manual recording Audio Recording &...

  • Page 64: Ptz Control

    Data Backup/Expansion/Copy External HDD(eSATA) Data backup External CD-R/DVD-R(eSATA) 5~ 95% alarm Backup reminder External USB memory disk(USB 1.1 compatible) on USB port AVI Copy Input/Output Video Output 2 CVBS main monitor 1 S-Video 1 VGA 16 Loop out 1 Input : Line-in, 1 Vpp Audio 1 Output : Line-out, 1Vpp Software-controlled 1 internal buzzer...
  • Page 65 Mechanical Dimension (Wⅹ ⅹ ⅹ ⅹ Dⅹ ⅹ ⅹ ⅹ H) 430.0 x 362.0 x 44.0 5.04 kg (with one HDD) Weight...
  • Page 66 WEBGATE Inc. 6F, Hanlim Venture Town Bldg., 689-6, Geumjeong-dong, Gunpo-si, Gyeonggi-do, Korea (435-862) Tel : (82-31) 428-9300 Fax : (82-31) 455-3955 Sales@webgateinc.com www.webgateinc.com The contents of this manual can be modified in accordance with Firmware or Software upgrade. In the...

Table of Contents