1. Manuals
  2. Brands
  3. WebGate Manuals
  4. DVR
  5. 480L
  6. User manual

WebGate 480L User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
English
-16CH HDVR(480L) / 8CH HDVR(240M) / 4CH
HDVR(120H),
16CH HDVR(240C) / 8CH HDVR(240L)
Install & User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 480L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for WebGate 480L

Summary of Contents for WebGate 480L

  • Page 1 English -16CH HDVR(480L) / 8CH HDVR(240M) / 4CH HDVR(120H), 16CH HDVR(240C) / 8CH HDVR(240L) Install & User’s Guide...

  • Page 2: Introduction

    Introduction Thank you for purchasing a Hunt digital video recorder. This manual is for 16CH HDVR(480L), 8CH HDVR(240M), 4CH HDVR(120H), 16CH HDVR(240C), 8CH HDVR(240L). Before product installation and operation, please become thoroughly familiar with this user manual and other manuals referenced by this manual.
  • Page 3 Install&User Manual Caution As this equipment undergone EMC registration and suitable for business purpose, distributors and users are aware of this point. FCC Compliance Statement Caution : Any changes or modifications in construction of this device which are not expressly approved the party responsible for compliance could void the user's authority to operate the equipment.

  • Page 4: Important Notice

    When installing product, be cautious to locate on safe places where children are unreachable. 7. If Product does not operate properly, please contact the closest WEBGATE distributor for after sales service. Tampering or disassembling the product will void the warranty.
  • Page 5 Install&User Manual operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer. B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.

  • Page 6: Table Of Contents

    INTRODUCTION ................1 KEY FEATURES ................10 INSTALL MANUAL................13 1. FEATURE ..................13 Supplied Accessories ....................13 1.1.1. 16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H) Series ......13 1.1.2. 16CH HDVR(240C)/8CH HDVR(240L) Series ............14 1.2. Description & Function ....................15 1.2.1.
  • Page 7 Install&User Manual 3 MENU USE ................４９ Menu Structure ......................４９ Function Menu ......................４９ Factory Reset ......................５０ 4 MONITORING ................５６ Basic Screen ......................５６ Single Fll Screen Mode ....................５６ Multi Screen Mode ..................... ５６ Screen Description ....................５７ Auto Switch Mode ......................
  • Page 8 Install&User Manual Playback Mode ......................６４ Playback on Standard monitor (16 / 9 / 4 division) ..........６４ 5.1.1 Playback function ....................６４ 5.1.2 SEARCH MODE ......................６５ Time Search ....................... ６５ 5.2.1 Schedule Search ....................６５ 5.2.2 Event Search ...................... ６６ 5.2.3 Thumbnail Search....................
  • Page 9 Install&User Manual Sync Event ......................９２ 6.5.2 Motion Detection ....................９４ 6.5.3 Sensor ........................ ９５ 6.5.4 Preset ......................... ９５ 6.5.5 Recording setup ......................９７ Program setup ....................９７ 6.6.1 Manual/Schedule recording setup ............... ９９ 6.6.2 WEB VIEWER ..............１０３ System requriement....................１０３ Login ........................
  • Page 10 USER MANUAL FOR MOBILE VIEWER ......１１５ Log-In page ......................１１５ Monitoring page ..................... １１５ TROUBLE SHOOTING .............１１７ AVAILABLE HDD ..............１１９ COMPATITABLE CD/DVD LIST ..........１２０ SPECIFICATION................１２０ -16CH HDVR(480L), -8CH HDVR(240M), -4CH HDVR(120H) .......... １２０ 16CH HDVR(240C), 8CH HDVR(240L) ................１２３ PRODUCT SIZE ................１２６...

  • Page 11: Key Features

    8CH HDVR(240L) : 1/4/9 channel mode  Auto Switching -16CH HDVR(480L) : Composite x 2, DVI x 1 -8CH HDVR(240M) : Composite x 2, DVI x 1 -4CH HDVR(120H) : Composite x 2, DVI x 1 -16CH HDVR(240C) : Composite x 2, VGA x 1...
  • Page 12 Install&User Manual Recording It supports max. 480ips/-16CH HDVR(480L), 240ips/-8CH HDVR(240M), -16CH HDVR(240C), 120ips/8CH HDVR(240L), -4CH HDVR(120H) recording at High-Resolution (H.264) and available to record max. 5 seconds before triggering an event. Also, convert function is available protecing privacy.  H.264 Video recording with High-Quality...
  • Page 13 Install&User Manual Back up device It is available to backup to DVD-R, CD-R, USB memory by user’s choice. (-16CH HDVR(240C), 8CH HDVR(240L) is available as an option.)  Supprots various back up device : DVD-R, CD-R, USB memory  Extention HDD Storage (External extention Storage device) Network It supports variable network like LAN, XDSL and easily control from remote site using PC cliet viewer.

  • Page 14: Install Manual

    Install&User Manual Install Manual 1. Feature Supplied Accessories Unpack and check all the items as below 1.1.1. 16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H) Series AC Cord, Remocon, Setup CD, SATA Cable, HDD Fixing Screw, Quick Guide...

  • Page 15: 16Ch Hdvr(240C)/8Ch Hdvr(240L) Series

    Install&User Manual 1.1.2. 16CH HDVR(240C)/8CH HDVR(240L) Series AC Cord, Remocon, Setup CD, SATA Cable, HDD Fixing Screw, Quick Guide...

  • Page 16: Description & Function

    Install&User Manual 1.2. Description & Function 1.2.1. Front 1.2.1.1. 16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H) Series Front Item Description DVD-Multi (For Back up use for recorded data by DVD/CD media Back up) Channel Button To select video input channel REC LED Displays recording status...
  • Page 17 Install&User Manual To change Monitor/ Stop Menu To enter menu To escape from menu or close pop-up window Enter/Play To enter playback mode or select menu ◀/REW To move or select in menu and change replay speed to reverse direction in playback mode ▶/FWD To move or select in menu and change replay speed to forward direction in playback mode...
  • Page 18 Install&User Manual 1.2.1.2. 16CH HDVR(240C)/8CH HDVR(240L) Series Front Item Description DVD-Multi (For Back up use for recorded data by DVD/CD media Back up) Channel Button To select video input channel REC LED Displays recording status COPY LED Displays copy status HDD LED Displays HDD running.
  • Page 19 Install&User Manual ◀/REW To move or select in menu and change replay speed to reverse direction in playback mode ▶/FWD To move or select in menu and change replay speed to forward direction in playback mode ▲/Pause To move or select in menu and pause live/ replay video ▼/Stop To stop replay in playback mode...

  • Page 20: Rear

    Descrtiption Ground Ground between DVR & external device CH1~16 BNC input for camera connection 16CH HDVR(480L) : 16EA, 8CH HDVR(240M) : 8EA, 4CH HDVR(120H) : 4EA Loop out BNC output(Loop) for camera connection Monitor/ Spot BNC connection for monitor output...
  • Page 21 Install&User Manual 번호 Input/ Output name Descrtiption Ground Ground between DVR & external device Cooling system against over heating Power connector Socket for AC100V~AC240V power cord...
  • Page 22 Install&User Manual 1.2.2.2. 16CH HDVR(240C)/8CH HDVR(240L) Series REAR 번호 Input/ Output name Descrtiption Ground Ground between DVR & external device Power connector Socket for AC100V~AC240V power cord CH1~16 BNC input for camera connection 16CH HDVR(240C) : 16EA, 8CH HDVR(240L) : 8EA Monitor/ Spot BNC connection for monitor output Audio Input(RCA)

  • Page 23: Remote Controller

    Install&User Manual 1.2.3. REMOTE CONTROLLER It is available to use all functions of DVR. If several DVR are set with unique ID numbers, they can be controlled with one remote controller. To use remote controller, it is necessary to set ID first which want use. Keep pressing ID button repetedely (Up to Max. 16 times) and use it matching DVR &...
  • Page 24 Install&User Manual SEARCH To indicate search menu CHANNEL BUTTON To select channel SELECT Not use In case of selecting over 10 (+10 + 1) Not use Not use MENU Covert to menu screen HELP Not use ◀/REW Move setting menu to left direction/REW ▶/FWD Move setting menu to right direction/FWD ▲/PAUSE...

  • Page 25: Installation

    2.1.1.1 Connecting camera Connect CCTV camera to DVR with BNC cable as below [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] [16CH HDVR(240C) 16CH HDVR(240L)] - The video type for all channels should be either NTSC or PAL, not be combined both - DVR sets video signal’s impedance (75Ω) automatically. Impedence is set as 75 Ω basically. If connecting a dvice to video output, impedance will be “Hi-z”...

  • Page 26: Connecting Audio

    Install&User Manual 2.1.1.3 Connecting Audio Connect audio signal to DVR with using RCA cable or D-SUB as below; [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] [16CH HDVR(240C)/ 8CH HDVR(240L)] 2.1.1.4 Supplying Power Connect power cable as below; [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] [16CH HDVR(240C)/ 8CH HDVR(240L)] - When supplying power, DVR starts booting automatically.

  • Page 27: Running Osd Menu

    Install&User Manual [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] [16CH HDVR(240C)/ 8CH HDVR(240L)] Running OSD menu 2.2.1 OSD menu configuration Press [MENU] in keypad of front to open configuration menu as below; (1) Main Menu : The selected tab is show in bright color and the related sub-menu will be shown left- below the tab.

  • Page 28: Setting Remote Controller

    Install&User Manual is available to upper sub-menu. 2.2.1.1 Dialogue box to edit a word Dialogue box to edit a word is image shown as below; It is available to input both word and bumber. Keep pressing [▲/▼], [◀/▶] arrow button until the word is looking for and press Enter. In case of deleting input word press [], spacing words press [] button.

  • Page 29: Install Examples

    Install&User Manual Up to 16DVRs can be controlled with a single remote controller. When not using remote controller, set the Remote Control ID as “Off” 2.2.2.2 Selecting ID If several DVRs are with unique ID numbers, they can be controllerd with one remote controller. To select a specific DVR, keep pressing the ID button of remote controller until a buzzer sounds during 2 seconds.

  • Page 30: Advance Configuration

    Install&User Manual [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] [16CH HDVR(240C)/8CH HDVR(240L)] 2.2.3.2 Advance configuration [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] ２９...
  • Page 31 Install&User Manual [16CH HDVR(240C)/ 8CH HDVR(240L)] 2.2.3.3 External storage & Back up configuration [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] [16CH HDVR(240C)/ 8CH HDVR(240L) 2.2.3.4 Internet/ Intranet configuration [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] ３０...

  • Page 32: Basic Setting

    Install&User Manual [16CH HDVR(240C)/ 8CH HDVR(240L) 2.2.4 Basic Setting 2.2.4.1 Viewing Image When power is on, eDVR starts automatically and displayed in basic 16ch-split screen after booting. <Reference> If user password is set, a prompt for entering the password will be appeared. Factory default is reserved as not responding keypad on DVR front (It is not from factory default).
  • Page 33 Install&User Manual 2.2.4.2 Setting Date & Time - Press [MENU] button and select “ System” when OSD menu is appeared. - Select“Date/Time”and press [Enter] button. Time Zome (1) Select “Time Zone” using [◀/▶] or [▲/▼] arrow button and press [Enter] button. (2) [◀/▶] Select “Time Zone”...

  • Page 34: Record Setting

    Install&User Manual Time (1) Select “Time” using [◀/▶] or [▲/▼] arrow button and press [Enter] button. (2) Select Date, Time using [◀/▶] arrow button and set value using [▲/▼] arrow button. (3) Press [ESC] after finshing value setting. Apply Most setting values are appled automatically, when exiting form the related menu page. But “Date”...
  • Page 35 Install&User Manual Program Setting Set resolution, frame rate, quality by each channel that user want record in “Program” of record menu. Schedule Setting Set recording mode as “Scheduel & Event” and set by date/ time. Checking method for recording <Reference> If recodrding setting is finished correctly, “REC LED”...

  • Page 36: Connecting And Configuring Dio Ports

    Install&User Manual Connecting and configuring DIO ports 2.3.1 Wire Handling When connecting a wire to a terminal block, follow the instruction below. Not the different types of wire that can be used. - Standard wire : Pie off the wiring cover 8~10mm and solder it. Wire gage should AWG 22~26.
  • Page 37 Install&User Manual Input Ch Transistor input -16CH HDVR(480L). -16CH HDVR(240C) : 16EA, -8CH HDVR(240M), 8CH HDVR(240L) : 8EA -4CH HDVR(120H) : 4EA Spec Input type N.C, N.O supprt Supported sensor Dry contact sensor Way of connecting Connecting the trimmed wire to terminal block...
  • Page 38 Install&User Manual All sensor It is used when setting for all sensors and set Off, or Normal Open (N.O.) / Normal Close (N.C.) type. (1) Select All and set type. Each sensor It is used when setting for each sensor and set selecting each sensor. (1) Select sensor and press [Enter] button.
  • Page 39 Connecting relay out Connect R1 ~ R2 with referring to the following images, it shows to connect a warning light. Please refer the “Wire Handling”. [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] [16CH HDVR(240C)/ 8CH HDVR(240L) Relay setting It is available to run relay selecting from sensor, motion detection, Video Loss which is normal event source and Disk error, Disk full, authentication fail, WRS registration fail which is system event source.

  • Page 40: Connecting Serial Port

    OSD configuration menu. The following figure shows how to connect PTZ camera to RS485 (COM2/COM3). When using another serial port, connect it with referring to each connection diagram below. Please refer the “Wire Handling”. [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] [16CH HDVR(240C)/ 8CH HDVR(240L) ３９...
  • Page 41 Install&User Manual Serial communication port diagram COM1 Connection (RS-232) COM2/COM3 Connection (RS-485) Available PTZ is same as below table. Model Name Manufacturer Webgate Keyboard KBD300A, WGI SPD1800/2600 WKC-100 Keyboard Webgate BOSCH AutoDome, TC8560X-4 Bosch Pelco PELCO(P), PELCO(D) Sony EVI-D3x Sony...
  • Page 42 Install&User Manual Sungjin SungJin SJ372R1’ Samsung SCC641 Samsung Electric Panasonic Panasonic WV-CS850 SDZ160/330, Samsung SPD, Samsung Techwin Keyboard SCC3000, Samsung SRX-100B LG GAC-PT2 Merit Merit-Lilin FastDome Elmo Elmo PTC200C Canon VC-C4 Canon Dongyang Unitech HTC-230S Honeywell Honeywell 755/655, HRX-2000, ScanDome2 RVision Elbex Elbex...
  • Page 43 Install&User Manual 2.3.3.4 Connection to external device via Seria port Text input device connection (ATM / POS / Access Control) Using COM1/RS232, TEXT DATA can be recorded with synchronizing POS/ATM. Like above picture, connect COM1/RS232 (9pin D-Sub) in Device menu and configure Serial and Text.

  • Page 44: Usb Device Connection

    USB port is for the simple video copy (within 1 hour) on USB Flash memory. Its recommended specification is same as below. USB Spec. Ver 2.0 Device USB Memory Stick, Voltage/electric Max. 200mA per DC 5V / Port current [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] [16CH HDVR(240C)/ 8CH HDVR(240L)] ４３...
  • Page 45 Install&User Manual <Reference> It should be formatted by FAT32. In case of normal connection, if executing Copy menu, disk will be recognized same as below and Set copy range  Select Drive  Execute Copy. [CD/DVD Copy] [RE4 Copy] Select the channel to copoy ４４...
  • Page 46 For instance, if connected by Video input, end resistance is configured by75Ω and if Video in/output is same, it will be Hi-z mode. Therefore, in case that Input/Outut are connected at the same time, end resistance of device receving output should be configured by 75Ω. [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] ４５...

  • Page 47: Hdd

    Install&User Manual [16CH HDVR(240C)/8CH HDVR(240L)] 2.3.3.7 Audio In/Out connection There are 4 RCA Audio Input and 1 RCA output. 2.3.4 ※ Please, refer to Appendix for available HDD list 2.3.4.1 HDD registration and format After mounting HDD and booting system, “Disk Manager” will execute automatically. If not, please, check the connectivity of HDD.

  • Page 48: Remote Monitor And Control

    2.3.5 Remote monitor and control Via Internet/Intranet, in remote site, user can access with PC. 2.3.5.1 Ethernet connection [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H)] [16CH HDVR(240C)/ 8CH HDVR(240L)] (1) Cut Power. (2) Connet Ethernet cable to DVR and Hub. (3) Input Power.
  • Page 49 Install&User Manual Ethernet Set type as Ethernet and input IP, Netmask,Gateway, DNS. The way to input is using directional key or mouse wheel. PPPoE Set type xDSL, and move to xDSL menu. First, change Ethernet Port Please, input ID and Password for PPPoE. After changing interval over 1 min, register WRS address and product and input Group ID.

  • Page 50: User Manual

    Install&User Manual User Manual 3 Menu Use Menu Structure The menu structure will be shown like below image, and each menu setting method descriped from chapter 4 to chapter 6. Function Menu To execute Function menu, click the right button of mouse or select ‘FUNC’ button on front panel.

  • Page 51: Factory Reset

    Install&User Manual Factory Reset In order to reset value to factory value, go to System Setting->System->Setting, and once press Factory Reset then the warning message will be appear, click “Yes” to reset the DVR value to factory. Default Value from Factory System Time Zone UTC 00:00 Dublin...
  • Page 52 Install&User Manual Holiday Select UTC 00:00 Dublin Date Format Time MM/DD/YYYY Over Write(Auto Deletion) Block Playback Disk Disk Full Alarm Warning Disk Manager >> Disk Status >> User No Password used Setup DVR Alias DVR0 DVR Keyboard ID Remote Controller Utility Language English...
  • Page 53 Install&User Manual Group Newbie Status Not Registerd Device Camera Camera Number Name Cam 1 Status Type NTSC Color Color Enable Bright Contrast PTZ Home Idle Time PTZ Port None PTZ Address Monitor Alarm Pop-up(Sec) User Sequence << Configuration Monitor SEQ Time(Sec) Covert >>...
  • Page 54 Install&User Manual Delimiter 0D0A Timeout(ms) 1000 Lines Serial Port Com1 Device Interface RS232 Serial Baud Rate 9600 Parity Bit None Stop Bit Data Bit Event Event Check Always Event Action Relay1 Action Duration 10 Sec Event Normal Event >> Source System Event >>...
  • Page 55 Install&User Manual Program initial value 8CH HDVR(240L) Record mode Normal Event Division Half Half Half Half Half Half -16CH HDVR(240C) Record mode Normal Event Division Half Half Half Half Half Half -4CH HDVR(120H) Record mode Normal Event Division Half Half ５４...
  • Page 56 Install&User Manual Half Half Half Half -8CH HDVR(240M) Record mode Normal Event Division Half Half Half Half Half Half -16CH HDVR(480L) Record mode Normal Event Division Half Half Half Half Half Half ５５...

  • Page 57: Monitoring

    Press [MULTI] for multi channel display or click “Display” icon from Function menu. Press [MULTI] button every time, screen mode for 16CH HDVR(480L), 16CH HDVR(240C) is changed to 1~4, 5~8, 9~12, 13~16, 4C, 1~9, 8~16, 1~10, 16 screens, and for 8CH HDVR(240M), 8CH HDVR(240L) is 1~4, 5~8, 4C, 9screens, and for 4CH HDVR(120H) is 1~4screens.

  • Page 58: Screen Description

    Install&User Manual Screen Description The status bar from monitoring screen, it shows DVR’s current status that included Date/Time, Record, Motion/Sensor Detection, Manual Record, Text input and HDD’s record capacity. Auto Switch Mode There are System Standard modes and User Defined mode in Auto Switch mode. And Users Sequence mode operates by the press [SEQ] button.

  • Page 59: User Sequence Mode

    Install&User Manual Auto Switch mode can be set in every division mode by the press [Auto] button. Press [Auto] button once more to leave from Auto Switch mode. 4.5.2 User Sequence Mode Press [AUTO] button or click [Sequence] icon from Function menu with mouse. Auto Switch model can be set from “Monitor”...

  • Page 60: Event Screen

    Install&User Manual User mode can define max. 16 channels. As shown above picture, the 16ch DVR can be define between channel 1 ~ 16, the 8ch DVR from 1 ~ 8 and the 4ch DVR from 1 ~4. Event Screen When there is an event occurred, the green color [M] and red color [S] will be display from status bar.

  • Page 61: Zoom Screen Mode

    Install&User Manual 1. If Alarm Pop-up Hold (sec) set to Off, Alarm Pop-up will not operate. 2. If Alarm Pop-up Hold (sec) set to Keep, it does not return to previous screen before press any button Zoom Screen Mode From single full screen mode, press [FUNC] and D-Zoom button then select + button to activate zooming the image.

  • Page 62: Ptz Control

    AD SpeedDome SungJin SJ372R1 SungJin Samsung Electric Samsung SCC641 Panasonic WV-CS850 Panasonic SDZ160/330, Samsung SPD, Samsung Techwin Keyboard SCC3000A, Samsung SRX-100B LG GAC-PT2 Webgate Keyboard KBD300A, WGI SPD1800/2600 WKC-100 Webgate Merit Merit-Lilin FastDome Elmo Elmo PTC200C Canon VC-C4 Canon HTC-230S...

  • Page 63: Pan/Tilt

    Install&User Manual LiveEye Fine CRR-1600 Tokina Tokina Kodicom Kodicom KRE Nuvico Nuvico Press desired channel button. Press PTZ button from front panel or click PTZ icon from function menu with mouse. PTZ menu (Pan/Tilt, Zoom/Focus, Load Preset, Save Preset) will be appear. Then press [Enter] button or click from mouse.

  • Page 64: Auxiliary Off

    Install&User Manual 4.9.6 Auxiliary Off This menu is used to stop operation of specific function of PTZ device. Using up / down button or mouse wheel to select the Aux Number. Select Off and press Enter button or click from mouse. 4.9.7 Menu It is to go into connected PTZ’s menu, using up/down/left/right and enter key from front panel for setting the menu, and press ESC button for exit the menu.

  • Page 65: Playback

    Install&User Manual 5 Playback Playback Mode 5.1.1 Playback on Standard monitor (16 / 9 / 4 division) Please, push play button in monitoring mode or mouse click play buttion in Function menu. If pushing Play button or FWD button, video playbacks in forward direction at 1× speed. If pushing REW button, video playbacks in reverse direcetion at 1×...

  • Page 66: Search Mode

    Install&User Manual SEARCH MODE This menu is to playback specific time data from the time frame and searching log at Playback mode. There are Time, Calendar, Event, Thumbnail mode. Please, push Search button on the front panel or click in Function menu. 5.2.1 Time Search Select date and time to search and playback video will be moved to the selected point.

  • Page 67: Event Search

    [16CH HDVR(480L)/16CH HDVR(240C)/8CH HDVR(240L)] [8CH HDVR(240M)] [4CH HDVR(120H)] Depends on models, 16CH HDVR(480L), 16CH HDVR(240C) shows the status of recording for 1~16ch, 8CH HDVR(240M), 8CH HDVR(240L) for 1 ~ 8ch, 4CH HDVR(120H) for 1~4ch. Year : Select Year to search. With mouse wheel, user can change it.

  • Page 68: Thumbnail Search

    Enter and change the value by Up and Down button. With mouse, click and scroll the wheel. Event Channel : Select the channel for search 16CH HDVR(480L), 16CH HDVR(240C) from Ch1 to Ch16 8CH HDVR(240M), 8CH HDVR(240L) from Ch1 to Ch8 4CH HDVR(120H) from Ch1 to Ch4 Event Type...

  • Page 69: Copy

    Install&User Manual Start Time : Input the date and time for starting search and change the value using up-down direction key or mouse wheel. Interval : Set Interval value by Up-down button or mouse wheel. View video : If pushing search button, 16 cycles will be shown based on start time. Press [Func] to return to the search or use mouse wheel.

  • Page 70: Re4

    User can back up by HDD, USB memory and play back suing mini-player or Control Center. Select channel position and press Enter or use mouse wheel to open the channel list like below. [16CH HDVR(480L)/16CH HDVR(240C)] [8CH HDVR(240M/8CH HDVR(240L),) ６９...

  • Page 71: Avi

    Install&User Manual [4CH HDVR(120H)] Type : Select RE4 using up-down button or mouse wheel. Channel : To pop up the channel selection window, press Enter or use mouse wheel. Select Channel : use can select some or all channels and after selecting channel, press Enter or click mouse left button.
  • Page 72 Install&User Manual wheel. Duration : Set copy length. Copy as selected time length from the start using up/down key or mouse wheel. Select disk : Select media to copy. Press Enter and select media or click mouse. Start : Start copy. Press Enter or click mouse. Caution : If copied file is not played back, please, install integrated codec first.

  • Page 73: Configuration

    Install&User Manual 6. Configuration Recording Structure There are 4 modes in DVR recording. Configuration relation structure is like below. Please, refer to the below each item for detailed recording configuration. System Setup Time and Disk and authority can be configured. 6.2.1 Date/Time Time set should be configured prior to the recording.

  • Page 74: Time Setup

    Install&User Manual 6.2.1.1 Time Setup Caution: under recording, if user changes Time, it will affect time change on previously recorded video data in accordance with. Therefore, we recommend backup before time change. Press Main Menu of Function or [MENU] button on the front panel. Move to “quick setup”...

  • Page 75: Ntp Setup

    Install&User Manual <Caution> Except date/time configuration, other configuration records automatically, but “date/time” configuration influences critical effect to HDD recording file system, It doesn’t record automatically. To apply the changed value, user must press [apply] button. 6.2.1.2 NTP Setup NTP(Network Time Protocol) make time of connected devices synchronized. There are NTP server and client which get time signal from the server.

  • Page 76: Disk

    Install&User Manual NTP Local server IP In NTP local server Enable, configure server ip. Input IP address of NTP server or DVR set by NTP server In local network. Interval Configure interval of time sync. Caution: If use NTP client mode, user must set NTP on. 6.2.2 Disk It explains how to add or remove or format internal or external HDD.
  • Page 77 Install&User Manual If mounted Disk is full, alarm warning to user. 6.2.2.1 Disk This is menu for the management of internal or external HDD. Manage status, bad block, size, Yes or No etc. Type : display location or type of disk. Int A (Internal A HDD), Int B (Internal B HDD), Ext (External HDD) Model : HDD model name.

  • Page 78: Disk Status

    Install&User Manual - HDD is not used. - If No, keep previous HDD without change. 6.2.2.2 Disk Status Temperature and status of HDD will be shown. 6.2.3 User Setup There are administrator and user and administrator can use all functions. The max. number of user is 10 person.
  • Page 79 Install&User Manual <Reference> Admin Password is “12345” in factory default and from user 1 to 10 in order “11111”,”22222”,.. and user10 is “00000”. In case of 9 channel DVR user, press “0” for figure 0, in case of 16 channel, press button “10” Password change Select user ...

  • Page 80: Utility

    Install&User Manual [Authority Check] [Wrong password message] 6.2.4 Utility Configure the name of DVR, remote controller ID, Language. DVR Alias Set the name of DVR. DVR Keyboard ID This menu is to set the address of keyboard when using all functions of DVR by keyboard. Factory default is “1”.
  • Page 81 Install&User Manual be set with the different value. Remote Controller ID Max 16 remote controller ID can be set and one remote controller can manage 16 DVRs. Registration order for Remote controller. Make remote controller direction to DVR. Press ID button and figure in accordance with configured remote controller ID. If IDs are matached correctly, DVR buzzes.

  • Page 82: Network

    Install&User Manual Factory Reset Change all configuration value by factory default. Caution : Only administrator is allowed. Network This is menu for configuring network. ８１...
  • Page 83 Install&User Manual Type Configure type of Network (Ethernet/xDSL). If connected to cable modem or Lan directly to DVR, configure by “Ethernet”. If DVR connects to xDSL- one of PPPoE type, configure xDSL. But if it is not type of PPPoE, configure ‘Etherent’.

  • Page 84: Xdsl

    Install&User Manual Bandwidth Menu for configuring network data transmission capacity. Without any additional configuration, it works but if user want to set, please, ask for administrator. 6.3.1 xDSL DVR is connected to xDSL line and use PPPoE type, please change type by xDSL and configure user ID and Password.

  • Page 85: Device Setup

    ‘0’ or eDVR does not transmit any data for 2 days, the data is removed from WRS. WRS URL This menu is to set server address to register. WRS addresses that WebGate operates now are www.webgateinc.com or mycam.to.

  • Page 86: Camera Setup

    Install&User Manual 6.4.1 Camera Setup Select the camera to configure in Channel menu. 6.4.1.1 Title Configure camera name. If pressing [Enter] button or click mouse, test menu will be shown. For text string, text input box will be shown. Use directional key for text input. With mouse, just click the text.

  • Page 87: Monitor Setup

    [Enter] button or use mouse. If channel selection is down, press [ESC] button or click mouse light button. DVI Resolution There are nine resolutions – 480L, 240M, 120H : 800x600@56Hz, 1024 x 768@60Hz, 1280 x 720@50Hz,1280 x 720@60Hz, 1920 x 1080p60, 1920 x 1080i50, 1920 x 1080i60, 1920 x ８６...

  • Page 88: Audio Setup

    Install&User Manual 1080RB, 240C, 240L : 800x600@56Hz, 1024 x 768@60Hz, 1280 x 1024@60Hz, Display information Display information is to configure which information will be shown on live view and playback view. In live view, time,channel name, event, recording status, HDD, remote controller ID, text can be set and in playback view, time,command,channel name, event, text can be configured.

  • Page 89: Text Setup

    Install&User Manual Select audio in live view. If setting by “All”, input audio will be out in eery channels and if configured certain channel, input audio will be out on the selected channel only. 6.4.4 Text Setup Configure Text in Device menu. Recording Set On/Off of recording against Text input Sync Text with...

  • Page 90: Serial Setup

    Install&User Manual of a data. The reason of 2 Header is to detect maximum 2 data out because each device can output various datas. Delimiter Delimiter value can be different according to the manufacturer, please, refer to the product manual or seller. Time out Following lines defined here means maximum number of text line from one data.

  • Page 91: Ptz Setup

    Install&User Manual Interface Configure which interface user uses. COM1 is to RS-232C, COM2, COM3 are to RS-485. Baud rate/Parity/Stop Bit/Data Bit In put suitable value according to external device. 6.4.5.1 PTZ Setup Additional configuration for PTZ Address, PoirtPTZ PTZ Home Shift to Preset assigned if it has no movement in certain time while PTZ control.

  • Page 92: Event Check

    Install&User Manual 6.5.1 Event Check There are 3 items – Always, not apply, Timezon. In case of Timezone, with similar configuration window like schedule, user can configure event per weekday/time. • INDEX : Schedule configuration from 1 to 50 • Weekday •...

  • Page 93: Sync Event

    Action Duration runs if relay and buzz are configured, and goes on during the configured time. E-mail works by configured time interval. Normal Event Source User can configure Sensor, motion detection,V-loss,Text. Model Sensor V-Loss Text 16CH HDVR(480L) 16CH HDVR(240C) 8CH HDVR(240M) 8CH HDVR(240L) 4CH HDVR(120H) ９２...
  • Page 94 Install&User Manual System Event source System Event source can configure Bad block, Disk full, Fan error, authorization failure, WRS registeration failure. E-Mail E-mail address Input E-mail address to get event alarm by E-Mail. ９３...

  • Page 95: Motion Detection

    Install&User Manual Sender Address Not mandatory but necessary for receiver to find out which DVR sends event. Including Picture In general event, when sensor, MD, V-loss events are generated, the event information and channel video will be sent to e-mail together. But system event just send system event information.

  • Page 96: Sensor

    Sensor This menu is to setup the existing sensor input and type of sensor. -16CH HDVR(480L), -16CH HDVR(240C) have 16 inputs and -8CH HDVR(240M), 8CH HDVR(240L) have 8 inputs and -4CH HDVR(120H) has 4 inputs. Sensor has 2 types, Normal Open(N.O.) and Normal Close(N.C.).
  • Page 97 Install&User Manual ９６...

  • Page 98: Recording Setup

    Using [Program], adjust frame rate and quality and resolution and configure recording program for Manual&Event&Schedule. [16CH HDVR(480L), 16CH HDVR(240C)] [8CH HDVR(240M),8CH HDVR(240L)] [4CH HDVR(120H)] In event recording, one channel can record up to its max frame rate and if setting 2 channels as event recording, their recording frame rate will be adjusted automatically.
  • Page 99 Install&User Manual There are 3 resolutions - D1(704x480), Half D1(704x240), CIF(352x240) F (FPS) It means frame per second and can select 1 to 30fps. Max. frame can be changed according to the configuration. Q (Quality) There are 5 recording quality - Q5/Q4/Q3/Q2/Q1. Recommended quality for event recording is Q3. Max R/F Max R/F shows the number of frame available according to the selected resolution.

  • Page 100: Manual/Schedule Recording Setup

    Manual Recording Only in manual & event recording, manual recording runs and when pressing [REC] button, recording starts. If you want schedule recording, recording mode should be Schedule & Event. [16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H) Series] [16CH HDVR(240C)/ \8CH HDVR(240L)] 6.6.2.2 Schedule Setup It records according to the programmed schedule automatically.
  • Page 101 Install&User Manual check and select each program default vaule and select one of 26 program from A to Z or several programs. Below picture show program A. • INDEX : Schedule unit from 1 to 50 • Weekday : Set the day applicable •...

  • Page 102: Event Recording Setup

    Install&User Manual Edition Select INDEX to edit and change weekday, program,time directly. In case that INDEX 50 are all configured, select the time zone to change by mouse click and click the time again, previouse configuartion will be deleted and new configuration will be shown.
  • Page 103 Install&User Manual 3. Set Event applying time. Event Time configuration Configure time for event recording and there are 3 mode – Always, no use, Timezone. In “Always”, event works all the time and in “Timezone”, works during configured time. Configuration of Timezone is similar with schedule configuration and can configure weekday,time for Event.

  • Page 104: Web Viewer

    Install&User Manual 7. Web Viewer WebViewer is Web application program loaded to monitor real-time image or to minitor the images recorded through Web browser to PC located remotely. WebViewer is divided into Login page and Monitor to do monitoring real-time images, Playback to replay reocorded images.

  • Page 105: User Setup

    Install&User Manual If didn’t change the password in Control Center, ID and Password will be admin/12345. ID can not be changed. User Setup To access WebViewer, user authority and password can be changed in DVR or Control Center configuration In account menu, user password can be changed. Basic admin password is “12345”...

  • Page 106: Monitor

    Install&User Manual Login page provides manual installation program to use WebViewer function. PC that access to WebViewer first installs ActiveX to use WebViewer’s function. At this time when installation is not smooth, installation program needs to download from Login Page and install manually.

  • Page 107: Move To Playback

    Install&User Manual Double click on one of the playback screen to convert in 1 channel mode. After conversion to 1channel mode, double click on screen to return to previous division channels. At division screen, it can change screen location. If 3channel image moves to 6ch, drag 3ch image and drop on 6ch location so as to exchange between 3ch and 6ch image 7.5.2 Move to Playback...

  • Page 108: Channel On/Off

    Install&User Manual 7.5.3 Channel On/Off It is On/Off button for the Channel located to left in page. Click the channel wanted to On or Off. And Default is On. 7.5.4 Sensor Indication The icon indicates when sensor occurs in system When it sensorsed, relevant sensor icon comes to Red, and indicates sensor number of video.

  • Page 109: Event Data

    Install&User Manual 7.5.7 Event data It shows real time event data occurred at the bottom of monitoring page. Indicated Event data list are as follow.. (Table. Event Icon) Button Function Motion Detect On Sensor Input Relay Output On No Video, Video Detected 1.2.1.

  • Page 110: Using Ptz

    Install&User Manual of current monitoring channel. To save video, select the channel and click right button of mouse. Ans select “Save As” and point out the location and press Save button. 7.5.8 Using PTZ Among the icon on top of video on monitoring, click ‘PTZ’ to acitivate interfacing to control Pan, Tilt, Zoom, and Focus.

  • Page 111: Using Audio

    Install&User Manual Reference Supported PTZ camera list can be refereed to ‘4.8 PTZ manipulation. 7.5.9 Using Audio In case of Channel setup sync with Audio, press right mouse button on the image to activate pop-up menu to “Listen” or activate Audio listen button. First default is Mute. In case of listening Audio, select pop-up menu or button.

  • Page 112: Playback

    Install&User Manual Playback This page is to playback recorded images, and user who has authority of ‘HDD’ among user ID or administrator can use this function. Playback that is made up 16 divisions can play the images by searching through calander by recording period and moving the period.

  • Page 113: Printing

    Install&User Manual Save Iamge dialog box appears, then it can input message or select channel name, date, event data. Press ‘OK’ to open dialog box for the saving location, then save bmp file. 7.6.2 Printing Select image with mouse for the channel to print image saved, and then click ‘Print’ button. Window comes to input Memo, and click ‘OK’...

  • Page 114: Web Monitor

    Install&User Manual 7.6.4 Web Monitor Click ‘Go’ button at top of page, and it can move Web monitor page. 7.6.5 Channel On/Off It is the same function like Channel On/Off function at Web Monitor. It is Channel On/Off button located on right of Page, and click On or Off page for wanted channel.

  • Page 115: Functional Function At The Buttom Of Monitor

    Install&User Manual 7.6.8. Functional function at the buttom of monitor ① Indicates playback range of recorded image. ② Press button as the time set at (5) so as to change the time zone to playback in forwarding and backwarding. ③ From left button, it can ‘Move a frame back’, ‘Play backward’, ‘Stop’, ‘Play’, ‘Move a frame forward’.

  • Page 116: User Manual For Mobile Viewer

    Install&User Manual 8. User manual for Mobile Viewer Mobile viewer is viewer service to monitor video via mobile device. To access mobile viewer, user uses mobile device supporting Wi-Fi or smart phone or 3G. 8.1 Log-In page Below picture is Mobile viewer log-in page. To access log-in page via mobile viewer, please, type the address like http://IP/mvmenu.html.
  • Page 117 Install&User Manual For functions, please, refer to the below. [0] MENU : Move to Log In page [1] CH- : Move to the previous channel. [2] UP : Move to upside of Pan Tilt movement [3] WIDE : Zoom Out action [4] ...

  • Page 118: Trouble Shooting

    Install&User Manual Trouble shooting 1. DVR booting failure 1. Check the power 2. Check Power cord 2. No video on monitor 3. Check monitor power 4. Check cable between DVR and monitor 5. Check monitor cable port 6. Check DVR power is off 7.
  • Page 119 Install&User Manual 25. Check if Network cable is connected 26. Check DVR IP 27. Check Computer IP 28. Ping Test 29. Check PC specification if Webview video is not shown. 10. The cases necessary to contact the shop 30. In case of extraordinary working(ex: noise, smell or fume) 31.

  • Page 120: Available Hdd

    Install&User Manual #1. The way to check the manufacturing date It can be checked with its S/N(Serial Number). #2. S/N : Serial Number It means composite 12 digit number with product model name and production year,month, and week. It can be found on the attached label attached on the bottom of product or system info of configuration tool or system information 1 of DVR Func menu.

  • Page 121: Compatitable Cd/Dvd List

    TDK(×52 recomended) Imation(×16 recomended) Imation(×52 recomended) Sony(×16 recomended) Sony(×48 recomended) Specification -16CH HDVR(480L), -8CH HDVR(240M), -4CH HDVR(120H) Video input Video input standard NTSC or PAL auto detect Connectors 16CH HDVR(480L) : 16ch, 8CH HDVR(240M): 8ch, 4CH HDVR(120H) : 4ch analog video...
  • Page 122 Install&User Manual Scheulde 24hrs / 7day Playback Mode Instant playback / Search Speed 120 fps, Search Type Time, Calender, Event, Thumbnail Block Playback 1day ~ 31days Event & Alarm Event source MD, Sensor, Text Event check schedule 24hrs / 7day Event Action Recording, Relay, E-mail, Buzzer, Pop-up, Warning Message, PTZ preset...
  • Page 123 Backup device internal CD/DVD or USB drive S.M.A.R.T. Temperature and Health Serial & I/O Serial port 1 RS-232C, 2 RS-485 Sensor input 16CH HDVR(480L) : 16 dry-contact, 8CH HDVR(240M) dry-contact, HDVR(120H) : 4 dry-contact Relay output 2 relay Controller Device...

  • Page 124: 16Ch Hdvr(240C), 8Ch Hdvr(240L)

    Install&User Manual 16CH HDVR(240C), 8CH HDVR(240L) Video input Video input standard NTSC or PAL auto detect Connectors 16CH HDVR(240C) : 16ch, 8CH HDVR(240L) : 8ch analog video inputs BNC connector Main Video output Main output output via BNC & VGA 16CH HDVR(240C) : 1,4,9,10,16 mode 8CH HDVR(240L) : 1.4.9 mode User defined sequence / alarm pop-up...
  • Page 125 Install&User Manual Text input POS/ATM support, AVE VSI Pro/Hydra support System Alarm Alarm source HDD fail, HDD almost full, Fan fail, Pwd fail, DDNS fail Alarm action Warning message, buzzer, e-mail, relay Audio Input/output 4 RCA input, 1R CA output Compression 16KHz, 16bit sampling ADPCM Direction...
  • Page 126 Install&User Manual Sensor input 16CH HDVR(240C) : 16 dry-contact, 8CH HDVR(240L) : 8 dry-contact Relay output 2 relay Controller Device Front panel, IR remote, Joystick KBD, Mouse Software WebViewer Monitoring / Playback Mobile Viewer Monitoring with PTZ, iPhone & BB supported Control Center Standard, max 1000 clients ActiveX(COM) SDK Environmental &...

  • Page 127: Product Size

    Install&User Manual Product size 16CH HDVR(480L)/8CH HDVR(240M)/4CH HDVR(120H) １２６...
  • Page 128 Install&User Manual 16CH HDVR(240C)/8CH HDVR(240L) １２７...
  • Page 129 Install&User Manual Webgate Inc. Hanlim Venture Town B/D, 689-6, Keumjeong- Dong, Kyeonggi-Do, Korea(435-852) Tel: 82-31-428-9300 Fax: 82-31-428-9400 A/S Tel : 82-31-428-9341 www.webgateinc.com.com １２８...

This manual is also suitable for:

120h240c240m240l

Table of Contents