Inverter Setting; Country Setting; Connecting The Communication Wiring - Delta RPI H3A Operation And Installation Manual

Turn PV inverter on/off

7.2 Inverter Setting

7.2.1 Country Setting

Upon first start-up of the device, Country selection is required.
1. In the country setting page, press "SEL" button (NEXT) to select your country, press
"ENT" button to confirm this page.
2. Press "Enter" button to confirm your country setting.
NOTE:

7.2.2 Connecting the Communication Wiring

Multiple inverters can be monitored via the inverter's RS-485 connection (Figure 5-6),
but each inverter's ID must be assigned a unique value.
Make sure the inverter ID is different from each other in the same RS485 chain.
Country
XXX
01 : Italy
Next /
Italy
N /
Figure 7-1: LVRT characteristic
NOTE
30
Enter
Y