Connections; Line Inputs - Elan A6 Installation Manual

E L A N H O M E S Y S T E M S
Chapter 3: Connections
The A6 has many rear panel connections so it is important to label them all correctly. Label all input/output cable
and speaker wires with their destination or source and this will save time during installation and any future upgrades
to the system.
Use high quality line level RCA connector type cables for source connections to ensure the lowest possible noise
and best sound performance. For most applications use 16AWG 2 conductor speaker cable. For wiring runs longer
than 80 ft. it is recommended to use 14AWG 2 conductor speaker cable. The A6's high quality, gold plated 5-way
binding post will accomodate speaker cabling sizes up to 12AWG. Attaching banana plugs will enable the connec-
tion of larger cable sizes. A 3.5mm mono interconnect cable may be used for amplifier and systems triggering.
Line Level Audio Inputs
Connect the zones by inserting the RCA connectors into the dedicated direct input jack on each channel.
A6
© ELAN Home Systems 2009 • All rights reserved.
Figure 3-1: Line Inputs
A6
INSTALLATION MANUAL
From Audio
Output Source
RCA Patch
Cable
Page 13