Konica Minolta bizhub c450 Copy Operations page 85

2
No. Part Name
1 Front door FN4
2 Misfeed-clearing dials FN5
3 Exit tray 2
4 Exit tray 1
5 Exit tray 3
6 Job separator cover
7 Misfeed-clearing guide FN3
8 Misfeed-clearing guide FN2
9 Upper cover FN1
10 Horizontal transport unit cover
11 Right-side door FN7
12 Hole-punch waste container
13 Misfeed-clearing guide FN8
14 Stapler 1
15 Stapler 2
16 Jammed-staple-clearing dial
2-16
Before Making Copies
Description
Opened when clearing paper misfeeds within the
finisher (See p. 5-31.)
Turned when clearing paper misfeeds within the
finisher (See p. 5-31.)
Collects printed pages
Collects printed pages
Feeds out printed pages when job separator JS-
601 is installed onto finisher FS-507
Opened when clearing paper misfeeds within the
job separator (See p. 5-31.)
Opened when clearing paper misfeeds within the
finisher (See p. 5-31.)
Opened when clearing paper misfeeds within the
finisher (See p. 5-31.)
Opened when clearing paper misfeeds within the
finisher (See p. 5-31.)
Opened when clearing paper misfeeds from the
horizontal transport unit (See p. 5-31.)
Opened when clearing paper misfeeds, emptying
hole-punch waste, or replacing the staple cartridge
Removed when emptying hole-punch waste that
has accumulated from using the Punch settings
(See p. 9-31.)
Opened when clearing paper misfeeds within the
finisher (See p. 5-31.)
Used to staple pages
Used to staple pages
Turned when clearing jammed staples or replacing
the staple cartridge, or for moving the stapler to the
center (See p. 9-10, p. 9-20.)
C450