Konica Minolta bizhub c450 Copy Operations page 555

12
– If horizontal lines A
and B are angled as
shown below, touch
[+] to increase the
value of θ (between 1
dot and 10 dots).
– Each time [+] or [–] is
touched, the value is
increased or de-
creased by one in-
crement.
– If horizontal lines A
and B are aligned,
skip to step 11.
9
Press the [Start] key.
The adjusted test pattern is printed.
When is the adjustment applied?
?
% The adjustment is applied when the [Start] key is pressed. To can-
cel the adjustment, touch [Cancel] instead of pressing the [Start]
key.
10
Check the print result.
– If more adjustment is necessary, repeat steps 7 and 9.
11
Touch [OK].
12-62
Utility
A
B
C450