Stapling Copies (Staple Settings) - Konica Minolta bizhub c450 Copy Operations

Basic Copy Operations

Stapling Copies (Staple Settings)

!
Detail
In order for the copies to be stapled, all of the following conditions must
be met.
The paper width must be between 7-1/4 in. and 11-3/4 in..
The paper length must be between 7-1/4 in. and 17 in..
If the "Mixed Original" setting is selected, all copies must have the same
paper width.
If a Staple setting is selected, the "Sort" setting is automatically selected.
A Staple setting cannot be used together with the "Offset" setting.
If a Staple setting is to be selected, select the orientation in which the
document is positioned and the orientation of the page to be stapled,
otherwise the copies may not be stapled as desired.
For details on specifying the document orientation, refer to "Selecting the
Document Orientation (Original Direction Settings)" on page 3-25.
When Finisher FS-603 is installed
Paper Weight
16 lb to
24 lb
Number of Bound Pages
8-1/2 ×
11 w or
smaller
C450
Paper Size
8-1/2 × 11 w/v
11 × 17 w, 8-1/2 × 14 w
Maximum Number of Sets
One place
towards the
back
2 sheets 100 sets
3 to 5 sheets 80 sets
6 to 10 sheets 60 sets
11 to 20 sheets 30 sets
21 to 30 sheets 30 sets
31 to 50 sheets 30 sets/1,000
sheets
Loading Capacity (detected with ei-
ther measurement)
1,000 sheets 6 in.
500 sheets 3 in.
One place Two places
towards the
front
40 sets 40 sets
40 sets 40 sets
40 sets 40 sets
30 sets 30 sets
30 sets 30 sets
30 sets/1,000 30 sets/1,000
sheets sheets
3
3-75