3
–
Touch [Auto] to automatically determine the stapling position ac-
cording to the orientation of the loaded document. If the document
length is 11-11/16 in. or less, the long side of the paper is stapled.
If the document length is more than 11-11/16 in., the short side of
the paper is stapled.
–
If "Auto" is selected, the stapling position is set at the top or at the
left.
–
To cancel changes to the stapling position, touch [Cancel].
4
Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.
3-78
Basic Copy Operations
C450