Konica Minolta bizhub c450 Copy Operations page 72

Before Making Copies
No. Part Name
1 Main unit
2 Working Table WT-501
3 Fax Multi Line ML-501
4 Image Controller IC-402
5 Desk DK-501
6 Paper Feed Cabinet PC-102
7 Paper Feed Cabinet PC-202
8 Paper Feed Cabinet PC-402
9 Finisher FS-603
10 Punch Kit PK-501
11 Finisher FS-507
12 Job Separator JS-601
13 Video Interface Kit
VI-502*
C450
Description
The document is scanned by the scanner section,
and the scanned image is printed by the printer
section.
Referred to as the "machine", the "main unit", or
the "C450" throughout the manual.
Provides an area to temporarily place a document
or other materials
Installed to increase the telephone lines available
for faxing
External image controller that allows this machine
to be used as both a color printer and a color
scanner configured into a computer network
For details, refer to the manual provided with image
controller IC-402.
Allows this machine to be set up on the floor
Referred to as the "desk" throughout the manual.
The top drawer can be loaded with up to 500 sheets
of paper, and the bottom drawer can be used as
storage.
Referred to as the "single paper feed cabinet"
throughout the manual.
Both the top and bottom drawers can each be
loaded with up to 500 sheets of paper.
Referred to as the "double paper feed cabinet"
throughout the manual.
Can be loaded with up to 2,500 sheets of paper
Referred to as the "LCT" throughout the manual.
Feeds out printed pages. The "Offset" setting
(separating), Staple settings (stapling), and "Fold &
Staple" function (binding) are available.
• In order to install the finisher, the main unit must
be installed on the desk, on the LCT, on the
single paper feed cabinet, or on the double
paper feed cabinet.
Allows hole punching to be used if installed onto
finisher FS-603
Referred to as the "punch kit" throughout the
manual.
Feeds out printed pages. The "Offset" setting
(separating), Staple settings (stapling), and Punch
settings (hole punching) are available.
• In order to install the finisher, the main unit must
be installed on the desk, on the LCT, on the
single paper feed cabinet, or on the double
paper feed cabinet.
Copy exit tray installed on finisher FS-507
Referred to as the "job separator" throughout the
manual.
Used for connecting the image controller IC-402 to
this machine
2
2-3