To Log In To The Service Processor Using The Network Management Port; Using The Service Processor For Common Operations - Sun Oracle Sun Netra T5440 Installation Manual

Use is subject to license terms.
->
▼ To Log In To the Service Processor Using the Network
Management Port
Note – You must configure the service processor parameters shown in
the Service Processor Network Management Port" on page 84
network management port.
●
Open an SSH session and connect to the service processor by specifying its
network address.
% ssh root@xx.xxx.xx.x
...
Are you sure you want to continue connecting (yes/no)? yes
...
Password: password (nothing displayed)
Waiting for daemons to initialize...
Daemons ready
Sun(TM) Integrated Lights Out Manager
Version 2.0.0.0
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
->
Using the Service Processor for Common
Operations
Note – For more information on using the ILOM service processor, refer to the
Integrated Lights Out Manager 2.0 (ILOM 2.0) Supplement for Sun Netra T5440 Server.
88 Sun Netra T5440 Server Installation Guide • May 2011
"Configuring
before you can use the