Buttonhole; Automatic Buttonhole; Preparation For Sewing; To Sew - Kenmore 385.160201 Owner's Manual

SECTION VII. BUTTONHOLE
Automatic Buttonhole
_1_ Stitch selector:
Stitch width:
(_ Stitch length:
(_ Needle thread tension:
Presser foot R:
I1(BH)
3 to 6.5
Blue zone
2t06
Automatic buttonhole foot
• Preparation for sewing
_1_Groove
(_ Pin
Attachtheautomatic buttonhole f ootR. Make surethe
grooveon thefootholder catchesthe pinon thefoot when
lowering the presser foot.
S
f
l
®
_ WIDTH
_ LENGTH (_
®
• To sew
Button holder
(_ Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole foot.
The button holder on the foot takes a button up to 1.0"
(2.5 cm) in diameter.
Make a test buttonhole on an extra piece of the fabric to
check your settings.
Use interfacing on stretch fabrics.
[] Pull the button holder_l_to the back, and place the
button in it. Push it forward tightly against the button.
[] Pull the buttonhole lever_down as far as it will go.
[]
/
[]
J
J
76