Control Adjustments; Control Panel Removal - Raypak 259 Installation & Operating Instructions Manual

CONTROL ADJUSTMENTS

LCD DISPLAY

CONTROL PANEL REMOVAL

To remove the PC board from the heater, use the following procedure:
1. Turn off main power to the heater.
2. Remove front door to access wire harnesses.
3. Reaching underneath the PC board, carefully remove all connectors and wires from the PC board and
ON/OFF toggle switch.
4. Lift the front bezel lid and remove the two lower Phillips screws.
5. Carefully lift the control panel upwards and pull away from the heater.
6. The control panel can now be flipped around to remove or inspect the PC board.
7. Reverse procedure for re-installation.
OFF
TEMP ADJUST
BUTTONS
ON
MODE BUTTON
34