Kaba Mas High Security Pedestrian Exit Device with Electric Locking Trim Installation Manual page 2

WARNING: Kaba Mas locks are well protected from Electrostatic Discharge (ESD) damage once
they are installed, but can be damaged during the installation process if proper
precautions are not observed. Follow these precautions to avoid ESD damage when
installing the lock:
• Do not touch the end of the flex cable if the ESD protective cover has been
removed.
• Remove the X-09 lock cover assembly before touching the end of the flex cable.
• For the best protection, use an ESD wrist band grounded to the lock during
installation.
• The lock is protected to greater than 25,000 V when correctly installed.
T
RADEMARKS
The following items are trademarks or registered trademarks of the Kaba Mas in the United States and/or
other countries.
• PowerStar
• X-09