Covers; Install Chassis Cover; Install Lock Cover - Kaba Mas High Security Pedestrian Exit Device with Electric Locking Trim Installation Manual

Covers

Install Chassis Cover

1. Locate the chassis cover and plastic cover insert.
2. Orient the chassis cover as it will be installed, based on door handing, and slide the plastic cover insert into
the bottom of the chassis cover.
3. Position the chassis cover over the Rim Exit Device, aligning the cover cutouts to fit over the chassis.
Locate the cover flush to the surface of the door and bias the cover away from the door edge.
4. Secure the chassis cover to the Rim Exit Device chassis using four (4) #8-32 x 1/4" UFPHMS black flat
head screws.

Install Lock Cover

1. Locate the correct lock cover based on door handing. (Both a RHR and a LHR lock cover are included in
the Rim Exit Device box.)
2. Position the lock cover over the lock cover mounting brackets. Locate the cover flush to the surface of the
door and bias the cover away from the door edge.
3. Secure the lock cover to the lock cover mounting brackets using four (4) #8-32 x 1/4" UFPHMS black flat
head screws.
29