Electric Locking Trim Specifications; Rds - Power Supply Control Module - Kaba Mas High Security Pedestrian Exit Device with Electric Locking Trim Installation Manual

E L T S
LECTRIC OCKING RIM PECIFICATIONS
The Electric Locking Trim (ELT) feature is available from Kaba Mas as a Special Engineering request (SER)
based on the Model 1000 High Security Pedestrian Exit Device. This feature includes a Relatching Delayed
System (RDS) with power supply and control module.
The ELT feature provides control capabilities of trim lock/unlock by a guard or security system while allowing
free egress at all times. The ELT system can be activated to hold the trim unlocked momentarily or for
extended periods of time.
The ELT feature can be interfaced with automatic doors, card readers, automatic fire alarm systems, etc.
The ELT application requires the use of the RDS control module. For details on the RDS, see the section
below. Closing the normally open dry contact retracts the latch. Opening the normally open switch returns the
latch to the locked position.

RDS - Power Supply Control Module

The RDS, when energized by pressing the dry contact switch, will activate the first ELT device and one
second later, will activate a second ELT device. Please note that for each RDS, two ELT devices can be
controlled by one switch.
Notes:
1. Each RDS comes in a 6" x 6" x 4" NEMA rated box.
2. RDS weight is 8 lbs.
3. The RDS-2 specifications and wiring schematic can be found in the Electric Locking Trim & RDS
Installation section of the manual.
7