Main Logic Board - Datamax W-Class Maintenance Manual

Removal and Replacement

4.10 Main Logic Board

Removal:
1. Turn 'Off' and unplug the power.
2. Remove any data cables connected to the Main Logic Board.
3. Touch a metal area of the printer's frame to discharge any static electricity potential that you may be
carrying.
4. On the rear of the printer, remove the two Screws securing the Main Logic Board in the card cage.
5. Slide the Main Logic Board out of the card cage.

Note: To avoid damage to the Main Logic Board, store it in anti-static material and always use a ground strap
or similar device during handling.
Replacement:
1. Slide the Main Logic Board into the printer, pushing firmly to seat it into the backplane.
2. Reinstall the two previously removed screws.
3. Reconnect the data cables to the printer.
4-27