Global Hobby Wattage Sky Wizard Instruction Manual page 6

6
Carefully push one plastic wing brace into the rear
hole using the same technique.
Push the brace in straight so it doesn't push out through
the top or bottom of the wing skin.
Carefully line up the two holes in one outer wing panel
with the exposed ends of the plastic wing braces.
Carefully push the outer wing panel onto the wing
braces and up against the center wing panel. Make sure
to push the wing panel on straight so the wing braces don't
push out through the top or bottom of the wing skin.
Both wing panels should be pushed firmly together
as shown.
Continued on Next Page