Step 2: Testing The Motor - Global Hobby Wattage Sky Wizard Instruction Manual

Step 2: Testing the Motor

Looking from the back of the Sky Wizard, move the
left-hand transmitter control stick completely forward.
The horizontal control surface should move down.
Turn on the transmitter and plug in and install the
flight battery.
Make sure that the motor on/off switch is pulled back
toward you - see page # 13.
While keeping clear of the propeller, press the red
motor safety arming switch once.
WARNING: During the motor test keep everything clear
of the propeller, especially fingers and loose clothing.
While holding the Sky Wizard upright in the air with
the propeller pointing away from you, push the motor
on/off switch forward. The propeller should spin at a high
rate of speed.
When finished with the test, pull the motor on/off
switch toward you (the motor should turn off), unplug the
flight battery, then turn off the transmitter.
17