Step 8: Installing The Flight Battery - Global Hobby Wattage Sky Wizard Instruction Manual

Step 8: Installing the Flight Battery

12
Tie one end of the length of string to the eyelet in one
of the forward plastic wing braces.
The eyelet is on the bottom of the wing.
Pull the free end of the string over the bottom of
the fuselage and tie it tight to the eyelet in the opposite
forward plastic wing brace.
The string should be tight, but not so tight that it pulls
the wing down and distorts its shape.
If you ever need to remove the wing, remove the four
rubber bands and slide the wing (with the string still in
place) over the front of the fuselage.
Turn on the transmitter. Both the green and the red
LED's should light up.
IMPORTANT
Always make sure you turn on the transmitter first,
before installing the flight battery. After you're done
flying, remove the flight battery first, then turn off the
transmitter.
This will prevent unexpected radio signals from in-
terfering with your radio system.
Continued on Next Page