Global Hobby Wattage Sky Wizard Instruction Manual page 5

Step 2: Charging the Flight Battery
Step 3: Installing the Wing Panels
Plug the flight battery connector into the battery
charger connector. When plugged in properly you should
hear the connectors "click" together.
Note that the plugs can be plugged in only one way.
Plug the charger into a 110V AC wall outlet.
Charge the flight battery for 2 to 2-1/2 hours. Be
careful not to overcharge the battery.
To unplug the connectors, squeeze the tab on the
battery connector and pull the two connectors apart.
Carefully line up one plastic wing brace with the
forward hole in one end of the center wing panel.
Make sure the eyelet in the brace is pointing toward
the bottom of the wing.
Carefully push the wing brace firmly into the wing,
making sure to push the brace in straight so it doesn't push
out through the top or bottom of the wing skin.
Continued on Next Page
5