Global Hobby Wattage Sky Wizard Instruction Manual page 14

Now that you have completed the assembly of your
Sky Wizard, turn to page # 15 to begin testing your
Sky Wizard and getting it ready to fly!
14
Slide the flight battery into the styrofoam pocket in
the front of the fuselage.
The battery wires should be facing the top of the
battery as shown.
Push the flight battery down so it is resting on the
bottom of the fuselage.
Close the battery cover/canopy, making sure the
plastic latches snap into the slots in the fuselage.
The Sky Wizard does not have an on/off switch.
When you plug in the flight battery, the receiver and
servos are powered up.
Caution!
Do not press the red motor arming switch at this time.