Use - Hamron 220-141 Operating Instructions Manual

USE

STARTING
1� Check that the delivery hose is connected and that the tap is open�
2� Release the trigger catch�
3� Vent the hose by pressing the trigger until there is a steady flow of water through the nozzle�
STARTING THE ENGINE
Fig� 1 - Power switch
Fig� 3 - Choke
Check the oil and fuel level�
4� Connect the hose och open the tap�
5� Press the trigger�
6� Check that the engine switch is in the ON position (fig� 1)�
7� Open the fuel cock (fig� 2)�
8� Move the choke lever to the closed position (CLOSE) (fig� 3) and set the throttle to low speed (fig�
4)�
9� To start the engine, pull the starter cord slowly until it catches and then pull quickly�
10� Repeat steps 3–7 if the engine starts but then stops, or if there is more resistance in the starter
cord�
Fig� 2 - Fuel cock
Fig� 4 - Throttle lever
GB
53