C
ONNECTING TO A
To connect a switch to a power source:
Insert the power cable plug directly into the AC socket located at the back of
1.
the switch.
Figure 15: Power Socket
Plug the other end of the cable into a grounded, 3-pin, AC power source.
2.
For International use, you may need to change the AC line cord.
N
:
OTE
You must use a line cord set that has been approved for the socket type
in your country.
Check the front-panel LEDs as the device is powered on to be sure the
3.
Power LED is lit. If not, check that the power cable is correctly plugged in.
P
S
OWER
OURCE
– 45 –
| Installing the Switch
C
3
HAPTER
Connecting to a Power Source