Table 2: 1000 Mbps Shared RJ-45 Ports Status LEDs (1~2)
LED
Condition
(Link/Activity)
On/Flashing Green
On/Flashing Amber
Off
Table 3: System Status LEDs
LED
Condition
Power
On Green
On Amber
Off
Diag
On Green
Flashing Green
On Amber
Status
Port has established a valid 1000 Mbps network
connection. Flashing indicates activity.
Port has established a valid 10/100 Mbps network
connection. Flashing indicates activity.
There is no valid link on the port.
Status
The unit's internal power supply is operating
normally.
The unit has an internal power supply fault.
The unit has no power connected.
The system diagnostic test has completed
successfully.
The system diagnostic test is in progress.
After powering on, this indicates that the system
diagnostic test has detected a fault.
During operation, this indicates that an installed
SFP transceiver has failed.
– 29 –
| Introduction
C
1
HAPTER
Description of Hardware