Figure 18: Making Fiber Port Connections - Edge-Core ECS4610-24F Installation Manual

| Making Network Connections
C 4
HAPTER
Fiber Optic SFP Devices

Figure 18: Making Fiber Port Connections

As a connection is made, check the Link LED on the switch corresponding to
4.
the port to be sure that the connection is valid.
The SFP fiber optic ports operate at 1 Gbps, full duplex, with auto-negotiation of
flow control. The maximum length for fiber optic cable operating at Gigabit
speed will depend on the fiber type as listed under
Collision Domain" on page 53.
– 52 –
"1000 Mbps Gigabit Ethernet